Jump to content


Foc'd off

Member Since 06 Apr 2013
Offline Last Active Jun 13 2014 09:26 PM
-----

Topics I've Started

O-Rings For Fuel Delivery And Return.

13 June 2014 - 08:16 PM

Hi all, I have a 2002 1.4 focus, and the O-rings on the fuel send pipe from the top of the pump/sender assembly have failed. Does anyone know if these are available from Ford and if possible a part number please?

 

The original items were assembled as O-ring, nylon disc, O-ring on the snapfit fuel pipe from the pump.

 

Thanks in anticipation!!


1.4 Focus 2002 Tdc Tool Dimensions

08 August 2013 - 02:08 PM

Hi all, I'm going to change my cambelt this weekend on a 02 1.4 with 89k on the clock. I have seen the crank TDC holding tool which is apparently a 10x1.5mm thread with a narrower plain section.

 

My question is, can someone please tell me the length and diameter of the plain section and length of the threaded section to the bottom of the hex head.

 

I've seen a few examples of people using a threaded M10 bolt without the plain section which in my mind would cause the timing to be out by a degree or so.

 

I have the engineering ability to create this part, I just need the measurements.

 

Thanks.