This is the first time ive ever particiated in any kind of Forums however i really want to make my Ford Focus 1.6 Zetec Auto 57 plate look as cool as possible without breaking the bank to do it.
i have been so inspired by some of the topics ive read and as a kid have asked for advise. So i ask for as many advise and information on turning a standard interior, looking classy.
So far i have managed to chnage the trims of the sterring wheel only because the standard silver was worn out and for £9.99 these are perfect.
This post in particular was so inspiring http://www.fordowner...nally-finished/ thanks to Stoney
and http://www.fordowner...aded-headunits/ thanks Mike for the reply.
Now i want to change the following from the below standards (inspired by the above)
Now for the above i need info on parts, Stoney has provided a guide to install a Factory Sony 2008 (i think) system into the car. however i need to find out where i can get the tools from or the carbon effect or unless i wrap it how do i do it? like shown in Mike's Pic http://www.fordowner...aded-headunits/
finally the below pic, am little confused as my Cigg lighter doesnt have a flap as shown in Mike's pic http://www.fordowner...aded-headunits/. Is this something i can add/install? and can you tell me what they are called plz
so guys, you know what the plan is now i need you all to help with guidance and ref to make it possible.
O yes before i forget, my rear speakers have busted and i dont have a clue what to replace them with... Ive read many articles however it doesnt say what size are the correct ones and or if any other sizes can be installed without any hassle.
So guys your help on the above will be much appreciated and i wait in exitment on your response.
As you may have gathered ive never done anything like this before, always a first hey
Vinyl wrapping isnt too hard on easy objects,cut the vinyl and apply it to the trim then heat it with a heatgun/hairdryer push out any bubbles,stretching the vinyl with the heat to get any creases out,remember you arnt going to see the back of the trim so just get the best finish for whats actually visible to the eye.Plenty of stuff on these forums and a little bit on youtube for vinyl wrapping too.