Jump to content


Show

skyshaddow

Member Since 28 May 2013
Offline Last Active Today, 02:17 PM
-----

Posts I've Made

In Topic: Focus Mk2.5 Projector Lights

24 August 2014 - 08:33 PM

Possibly but the hole doesnt lead to anywhere no plug or socket or even an opening for it

In Topic: Focus Mk2.5 Projector Lights

24 August 2014 - 07:27 PM

Pics

In Topic: Focus Mk2.5 Projector Lights

24 August 2014 - 07:20 PM

Hi guys here is some pics. Not had a chance to put the nightbreaker bulbs in been a bit hectic this weekend. There are 2 spade connections hadnt had a chance to find out what they do yet and dong fancy blowing anything up lol.

In Topic: Headlights

24 August 2014 - 10:26 AM

If i remember correctly there was an advisory on the headlights where the elecs kept overloading n blowing the bulbs. Ford recommendation was to install resistor wiring into the holder to resolve the issue. That might be what thats for.

In Topic: Focus Mk2.5 Projector Lights

24 August 2014 - 10:20 AM

The lights do have a levelling motor in them some manual adjustment was needed though. Wiring is external to a single socket which hooks up to the existing stock lamp connector i am going to change the bulbs in them this afternoon so will take pics then