Jump to content


Show

skyshaddow

Member Since 28 May 2013
Offline Last Active Today, 12:25 PM
-----

Topics I've Started

Focus Mk2.5 Projector Lights

14 August 2014 - 08:50 PM

Hi guys i am looking for a set of projector lights for my focus 2.5 to use with halogen bulbs (recommendations accepted lol) i have found these on ebay would they be suitable or do i have to go down the whole xenon route? Its a titanium i have with a 10pin headlight connector with wires missing in puns 9 and 10. Any help would be appreciated.

http://pages.ebay.co...4793772&alt=web

Sent from my GT-I9505 using Ford OC mobile app

Turbo Issue

10 August 2014 - 05:20 PM

Hi all, i have encountered this wooshing issue twice in 4 months. First time it was a split pipe at the top 90deg bend. Replaced bend all good. This time its started again the engine management light came on and stayed on. I took the wee i think its the map sensor out of the steel pipe and double checked the recently replaced pipe all was fine with it. Now the engine management light has gone out but the issue remains. The car still wants too boost every now and again but jerkin about like a hookers hand on speed lol. Any suggestions would b a gr8 help.

Mike

Sent from my GT-I9505 using Ford OC mobile app


Sent from my GT-I9505 using Ford OC mobile app

Projector Lights

02 August 2014 - 05:53 PM

Hi Guys,

Been a while since i was last on so the car has behaved until now. Anyway i think the reflector inside the headlight is goosed due to the bulbs falling back into the unit. I reckon it may have warped them due to the heat and i cant get a real focused beam of light. I was thinking of buying the as wanting projector lights not necesaraily zenon as i have mtec halogens n i love them but would i still need the self levellers and the headlight washers?

http://pages.ebay.co...2218815&alt=web



Sent from my GT-I9505 using Ford OC mobile app

Hid Conversion

07 October 2013 - 05:37 PM

Hi guys,

I am thinking of converting to hid lights on my 08 focus titanium. Has anyone else done this? What kit did you use? Was it canbus etc.

your suggestion/info would be greatly appreciated.

Cheers
Michael

Central Locking

04 October 2013 - 06:58 PM

Hi Guys.

I seem to have an issue with my central locking, all doors lock apart from the drivers, when I sit in the car and try it the lock moves in a little but not all the way. I tried the push lock and unlock buttons together but that never worked either?

Its a 2008 titanium