Jump to content


Show

razzigstring

Member Since 10 Nov 2013
Offline Last Active Nov 18 2013 09:02 PM
-----

Posts I've Made

In Topic: (2009) Require Some Help With The Offside Wing Panel

14 November 2013 - 12:23 AM

ah right you're lucky in some ways I guess! could be lumbered like me, where a driver hit my car, leaving a rather large dent in the wing and the bumper was actually unclipped/unattached at one corner!!! hoping no clips have broke :(:( but yeah, guess these things happen.
:(  :(  :(


In Topic: (2009) Require Some Help With The Offside Wing Panel

13 November 2013 - 11:05 PM

Oh lord  :( the door aswell?! Looking at getting that done? or?

Mines just the front bumper and wing which need replacing, i've heard the bumper can take all of 20 minutes if you know what you're doing, however the wing may take me a tad longer by the looks of it! <_<


In Topic: (2009) Require Some Help With The Offside Wing Panel

13 November 2013 - 09:30 PM

Not yet mate, doing the job on Saturday. Doing a similar job then?


In Topic: (2009) Require Some Help With The Offside Wing Panel

12 November 2013 - 03:04 PM

Ah right, understandably really!

With the Wing (offside panel, whatever you may phrase it as) is it necessarily difficult to get too?
I will be taking off the old bumper anyhow, to replace that for a new one, but the wing I will do after removing the old bumper, 

Does the wing take some finding of bolts to get too? or is it relativley obvious? had a look online, found a how to for removing the bumper but not the wing! Also could you just clarify it is bolt on?

Thanks ever so much mate, you've been a real help, 


In Topic: (2009) Require Some Help With The Offside Wing Panel

11 November 2013 - 10:39 PM

Ah right thats brill mate haha! ill see if i can get a buddy of mine to help!
its not gonna look perfect, but then im not expecting it too ofcourse, just replace the parts with a mediocre job really!!

thanks man,

final question, you know you said you had to do some fiddleing and teaking when fitting the fender/front wing, can I ask why that was? I got a genuine part, so should all line up etc, just wondering why there may be trouble

Thanks ever so much for the help1!! ^_^