Jump to content


AJRTDDI

Member Since 28 Nov 2013
Online Last Active Today, 06:02 AM
-----

Posts I've Made

In Topic: My Restoration Project / Build. (Mk4 Escort)

27 July 2015 - 08:18 PM

Loom completed now.

Just waiting on a sump and oil pickup

In Topic: My Restoration Project / Build. (Mk4 Escort)

19 July 2015 - 09:15 PM

Number 31 and 32 are 02 sensors. Only share pin 1. I think thats not correct.

The picture is from normal 2.0 zetec.

In Topic: My Restoration Project / Build. (Mk4 Escort)

19 July 2015 - 06:22 PM

Thats all i have left.

That thick wire is to the coil. Green.

The smaller one is to 02 sensors that im not sure is ground or live ect yet. Yellow

Then thats about it.

In Topic: My Restoration Project / Build. (Mk4 Escort)

19 July 2015 - 06:11 PM

Last 2 photos match the loom in colour but locost says ecu pinout is different.

In Topic: My Restoration Project / Build. (Mk4 Escort)

19 July 2015 - 06:09 PM

Them colors i have for DLC.

As u can see the colors are wrong.

The think ecu gos into a canbus unit, then diagnostic port is can into the unit.


I do have a matching set of wires. But ecu layout says there for pin 6 and 14