Posted by rocky1722
on 03 September 2013 - 08:45 PM
Nice looking car you have there. I remember the mods you did to your white zs so I cant wait to see what you have planned for this one. We were actually parked next to one another at crail a couple of years ago and had a chat about your exhaust.
Was the wiring already in place for the footwell lights?
Oh yes I do remember your forum name from when we were at Crail.
The wiring and standard bulbs are already in place as standard along with the red lighting around the cupholder which is a great improvement over the old Mk7.
We fixed the front brackets on with x3 self tapping screws.
Again like the rear and using a piece of wire hooked at the end and dipped in a bit of paint we marked where the x3 holes should be drilled through the mudflaps.
After the x3 holes are drilled, fix the mudflap in place with the bolts and washers provided giving you this. Note how we've drilled into the plastic end cap that covers the end of the sideskirts and fitted a plastic fastening for extra securing.
And finally the finished article. (Note how the mudflaps appear to be a bit bendy looking. I think some of that is down to the mudflaps having been drilled to fit my original rear brackets which stuck out too much. Having made suggestions to PC new modified brackets have now been made for a better fit. If my mudflaps had been drilled to fit the new brackets I think they would have fitted slightly straighter)
Hope this helps, if unsure I'm sure a local garage would be prepared to fit them for you.