Jump to content

  2. → Viewing Profile: Posts: sooty

Show

Support the club!

FOC Supporters Membership | Ford Owners Club Insurance | Ford Accessories | Club Competition

sooty

Member Since 15 Sep 2009
Offline Last Active May 04 2012 07:24 PM
-----

Posts I've Made

In Topic: Mondeo 2006 Heater Not Working - No Lcd

04 May 2012 - 07:07 PM

hi there'

just to let you know that i have had the fault rectified. it turned to be the heater resistor part number 3s7h19e624ab . had it done at local auto-elecs , had to buy secondhand one from e-bay £26 as ford wont sell it on its own, they wanted £256 for a full blower fan

sooty

In Topic: Mondeo 2006 Heater Not Working - No Lcd

29 April 2012 - 02:30 PM

hello don,

you have the same fault as mine, except the blower to the quick clear windscreen is blowning at full speed .

cant find a blown fuse so far, would be interested to find out what your repair was

dsuter

In Topic: Refitting Radio

28 December 2011 - 11:24 AM

thanks stoney,

this is brilliant thanks .have ordered flat removal tools.info on recodeing radio brilliant

thanks again

dave suter

In Topic: Refitting Radio

28 December 2011 - 11:21 AM

Hi,
What model of radio do you have?
Removal keys depend on the model.
Slots will need:
http://www.ebay.co.u...=item3cb80b0a35

Holes will need :
http://www.ebay.co.u...=item415f87d988

The code is dialled in by using keys 1-4 on the radio.
You don't punch it in like a pin code, it is done by scrolling through each digit with the keys.i.e-
if the code was 9876 then push key one 9 times, key two 8 times, key three 7 times and key four 6 times.
When the code is dialled in correctly then press key five to apply the code.


  1. Ford Owners Club - Ford Forums
  2. → Viewing Profile: Posts: sooty
  3. Privacy Policy