Jump to content


chris bowman

Member Since 19 Oct 2009
Offline Last Active Apr 26 2013 05:20 PM
-----

Profile Feed

Photo

mintalkinchris bowman

this may be of help
http://cgi.ebay.co.uk/Wheel-Studs-12mm-x-1-5-Ford-Mondeo-fitment-/260408955234?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3ca1955162
also ebay has some complete hub for sale.
Jan 17 2011 09:07 PM
Photo

chris bowmanwebby91

click on add post near the top of the page enter subject etc, then click on add post at the very bottom
Jan 17 2011 07:45 PM
Photo

webby91chris bowman

can u help need a question answered i dont know how to get my question on main board im new on here 15mins ago
Jan 17 2011 07:39 PM
Photo

mintalkinchris bowman

you should be ok with the bearing as long as the hub is not abused too much.
Jan 17 2011 02:49 PM
Photo

mintalkinchris bowman

personally i would remove the hub to get the proper persuation from a workbench/vice as the studs can be tight,i have heard that it can be done without removal but have never done it thatway myself and you may have to remove the hub eventually because the stud will not remove.
Jan 16 2011 05:20 PM