Jump to content


Show

calmcdermott

Member Since 01 Nov 2009
Offline Last Active Jul 26 2014 10:41 PM
-----

Topics I've Started

Fiesta St500 Brake Disks

22 July 2014 - 08:51 PM

OK so completely and utterly confused.

The car is due new disks and pads, the rear have been done but the front well, this is where the confusion starts.

Standard fitment for the car is diameter wise 278mm but the ones I have are 333mm (theyre quite corroded so might be more or less).

The suspension is standard, so's the hubs and the pads but yet they dont fit!!!

Can anyone advise?

Thanks in advance

Fiesta St Suspension Knock

19 April 2014 - 11:33 PM

Ok here we go.

Had a knock coming from the passenger side front suspension for a while now, I've had the suspension stripped down and checked by 4 mechanics and everyone is baffled, it's not just me as they can hear it too (3 of the mechanics I personally know so wouldn't lie to me just to get the money).

Changed the suspension mount, checked the spring and strut, changed the anti roll bar bushes and drop links and also changed the bearing. Everything is tight with no play.

Best way I can describe is that it sounds like a hollow knock and sounds quite like well to be honest like me tapping on my iPad's screen whilst typing! It's over any little bump in the road and is driving me up the wall, any suggestions?

Inside Of Windscreen Soaked

10 November 2013 - 09:21 PM

I was wondering why my car has started to do this, every night the inside of the windscreen is soaked to the point where I need a squeegee to remove the water.

What can I do to stop this happening?

Wiring Loom Needed For St500 Heated Seats + Pics Of Poss.

09 August 2013 - 09:15 PM

HI guys and girls,

 

As above I could do with advise I have finally got my leather heated seats that are supposed to be in my car, however I have a problem in that the wire to the heated seat function on each side has ben snipped off so therefore I need new looms or an alternative way or wiring them up.

 

I would buy new but each side is £79 each which I cant really afford, could anyone take photos of how theirs is wired so I understand the connection?

 

Tar :)