Car Scanner ELM OBD2
DTC report
Selected brand: Ford

============1==============
C1B00(2F)
Raw code: 5B002F
ECU: PSCM
Status: Test not completed during this operation cycle

============2==============
C1B00(54)
Raw code: 5B0054
ECU: PSCM
Status: Test not completed during this operation cycle

============3==============
C1B00(61)
Raw code: 5B0061
ECU: PSCM
Status: Test not completed during this operation cycle

============4==============
C1B00(62)
Raw code: 5B0062
ECU: PSCM
Status: Test not completed during this operation cycle

============5==============
C200B(2F)
Raw code: 600B2F
ECU: PSCM
Status: Test not completed during this operation cycle

============6==============
C200B(61)
Raw code: 600B61
ECU: PSCM
Status: Test not completed during this operation cycle

============7==============
C200C(2F)
Raw code: 600C2F
ECU: PSCM
Status: Test not completed during this operation cycle

============8==============
C200D(49)
Raw code: 600D49
ECU: PSCM
Status: Test not completed during this operation cycle

============9==============
U0001(88)
Raw code: C00188
ECU: PSCM
Status: Test not completed during this operation cycle
Controller area network (CAN) data bus, high speed bus

============10==============
U0100(00)
Raw code: C10000
ECU: PSCM
Status: Test not completed during this operation cycle
Data bus, engine control module (ECM) A - no communication

============11==============
U0300(00)
Raw code: C30000
ECU: PSCM
Status: Test not completed during this operation cycle
Control module - internal software incompatibility

============12==============
U0401(00)
Raw code: C40100
ECU: PSCM
Status: Test not completed during this operation cycle
Invalid data received - engine control module (ECM)

============13==============
U2011(49)
Raw code: E01149
ECU: PSCM
Status: Test not completed during this operation cycle
Module Transmitted Invalid Data (Non SCP)
Module Transmitted Invalid Data (Non SCP)

============14==============
U2011(61)
Raw code: E01161
ECU: PSCM
Status: Test not completed during this operation cycle
Module Transmitted Invalid Data (Non SCP)
Module Transmitted Invalid Data (Non SCP)

============15==============
U3000(05)
Raw code: F00005
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============16==============
U3000(41)
Raw code: F00041
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============17==============
U3000(43)
Raw code: F00043
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============18==============
U3000(46)
Raw code: F00046
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============19==============
U3000(49)
Raw code: F00049
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============20==============
U3000(61)
Raw code: F00061
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============21==============
U3000(72)
Raw code: F00072
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============22==============
U3000(96)
Raw code: F00096
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============23==============
U3003(16)
Raw code: F00316
ECU: PSCM
Status: Test not completed during this operation cycle
Battery voltage

============24==============
U3003(17)
Raw code: F00317
ECU: PSCM
Status: Test not completed during this operation cycle
Battery voltage

============25==============
U3004(49)
Raw code: F00449
ECU: PSCM
Status: Test not completed during this operation cycle
Accessory power relay

============26==============
C1B00(95)
Raw code: 5B0095
ECU: PSCM
Status: Test not completed during this operation cycle

============27==============
U0155(00)
Raw code: C15500
ECU: PSCM
Status: Test not completed during this operation cycle
Data bus, instrumentation control module - no communication

============28==============
U2100(00)
Raw code: E10000
ECU: PSCM
Status: Test not completed during this operation cycle
CAN-BUS Communication Malfunction

============29==============
U2101(00)
Raw code: E10100
ECU: PSCM
Status: Test not completed during this operation cycle
CAN data bus - ECM incorrectly programmed

============30==============
U3002(62)
Raw code: F00262
ECU: PSCM
Status: Test not completed during this operation cycle
Vehicle identification number (VIN)

============31==============
U3000(44)
Raw code: F00044
ECU: PSCM
Status: Test not completed during this operation cycle
Control module

============32==============
C100C(00)
Raw code: 500C00
ECU: PSCM
Status: Test not completed during this operation cycle

============33==============
C200B(62)
Raw code: 600B62
ECU: PSCM
Status: Test not completed during this operation cycle

============34==============
B0001(19)
Raw code: 800119
ECU: RCM
Status: Test not completed during this operation cycle
Driver Frontal Stage 1 Deployment Control

============35==============
B1129(19)
Raw code: 912919
ECU: RCM
Status: Test not completed during this operation cycle

============36==============
B0010(19)
Raw code: 801019
ECU: RCM
Status: Test not completed during this operation cycle
Passenger Frontal Stage 1 Deployment Control

============37==============
B0070(19)
Raw code: 807019
ECU: RCM
Status: Test not completed during this operation cycle
Driver Seatbelt Pretensioner "A" Deployment Control

============38==============
B0072(19)
Raw code: 807219
ECU: RCM
Status: Test not completed during this operation cycle
Passenger Seatbelt Pretensioner "A" Deployment Control

============39==============
B10FD(76)
Raw code: 90FD76
ECU: RCM
Status: Test not completed during this operation cycle

============40==============
B10FD(96)
Raw code: 90FD96
ECU: RCM
Status: Test not completed during this operation cycle

============41==============
B10FE(76)
Raw code: 90FE76
ECU: RCM
Status: Test not completed during this operation cycle

============42==============
B10FE(96)
Raw code: 90FE96
ECU: RCM
Status: Test not completed during this operation cycle

============43==============
B0094(76)
Raw code: 809476
ECU: RCM
Status: Test not completed during this operation cycle
Center Frontal Restraints Sensor

============44==============
B0094(96)
Raw code: 809496
ECU: RCM
Status: Test not completed during this operation cycle
Center Frontal Restraints Sensor

============45==============
B1126(19)
Raw code: 912619
ECU: RCM
Status: Test not completed during this operation cycle

============46==============
B1127(19)
Raw code: 912719
ECU: RCM
Status: Test not completed during this operation cycle

============47==============
B1128(19)
Raw code: 912819
ECU: RCM
Status: Test not completed during this operation cycle

============48==============
B0004(19)
Raw code: 800419
ECU: RCM
Status: Test not completed during this operation cycle
Driver Knee Bolster Deployment Control

============49==============
B1193(00)
Raw code: 919300
ECU: RCM
Status: Test not completed during this operation cycle

============50==============
U0300(00)
Raw code: C30000
ECU: RCM
Status: Test not completed during this operation cycle
Control module - internal software incompatibility

============51==============
U3000(00)
Raw code: F00000
ECU: RCM
Status: Test not completed during this operation cycle
Control module

============52==============
U3000(04)
Raw code: F00004
ECU: RCM
Status: Test not completed during this operation cycle
Control module

============53==============
U3000(09)
Raw code: F00009
ECU: RCM
Status: Test not completed during this operation cycle
Control module

============54==============
U3000(1C)
Raw code: F0001C
ECU: RCM
Status: Test not completed during this operation cycle
Control module

============55==============
U3000(29)
Raw code: F00029
ECU: RCM
Status: Test not completed during this operation cycle
Control module

============56==============
U3000(42)
Raw code: F00042
ECU: RCM
Status: Test not completed during this operation cycle
Control module

============57==============
U3000(47)
Raw code: F00047
ECU: RCM
Status: Test not completed during this operation cycle
Control module

============58==============
U3000(53)
Raw code: F00053
ECU: RCM
Status: Test not completed during this operation cycle
Control module