===PCM DTC P0693-60===
Code: P0693 - High speed fan output circuit malfunction - short to ground.

Status (-60):
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

Diagnostic Trouble Code details

High speed fan output circuit malfunction - short to ground.

===END PCM DTC P0693-60===

===PCM DTC P0646-60===
Code: P0646 - Air conditioning clutch relay circuit short to ground.

Status (-60):
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

Diagnostic Trouble Code details

Air Conditioning Clutch Relay Control Circuit Low

Ignore this DTC if the vehicle does not have AC fitted.

This DTC may be caused by :

Air conditioning clutch relay circuit short to ground.

Open Circuit

Air conditioning clutch

===END PCM DTC P0646-60===

===PCM DTC P0341-E0===
Code: P0341 - CMP sensor signal implausible.

Status (-E0):
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is On for this DTC

Module: Powertrain Control Module

Diagnostic Trouble Code details

CMP sensor signal implausible.

This DTC may be caused by :

Camshaft Position (CMP) circuit performance.

--Possible Causes--
	- Harness routing.
	- Charging circuit.
	- Damaged CMP.
	- Damaged PCM.

Note: Electrical noise detected.

Incorrect base Cam timing.

CMP sensor / wiring

===END PCM DTC P0341-E0===

===PCM DTC P0325-60===
Code: P0325 - Knock sensor 1 circuit malfunction

Status (-60):
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

Diagnostic Trouble Code details

Knock sensor 1 circuit malfunction

This DTC may be caused by :

Knock sensor (KS) / wiring.

Corroded or loose connections

Improper connection

Open or short in Knock Sensor circuit.

For additional information refer to:

Faulty or damaged PCM.

===END PCM DTC P0325-60===

===PCM DTC P0324-60===
Code: P0324 - Communication error with KS.

Status (-60):
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC

Module: Powertrain Control Module

Diagnostic Trouble Code details

Communication error with KS.

This DTC may be caused by :

Open or short in Knock Sensor circuit.

Improper connection

Sensor

Faulty or damaged PCM.

===END PCM DTC P0324-60===

===PCM DTC P1000-70===
Code: P1000 - On-Board Diagnostic (OBD) Systems Readiness Test Not Complete

Status (-70):
 - DTC Present at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC
 - Test not complete

Module: Powertrain Control Module

Diagnostic Trouble Code details

On-Board Diagnostic (OBD) Systems Readiness Test Not Complete

Follow the routines in the service manual to resolve the DTC listed.

===END PCM DTC P1000-70===

===OBDII DTC P0341-P===
Code: P0341 - CMP sensor signal implausible.

Status (-50):
 - Pending - malfunction is expected to be confirmed 

Module: On Board Diagnostic II

Diagnostic Trouble Code details

CMP sensor signal implausible.

This DTC may be caused by :

Camshaft Position (CMP) circuit performance.

--Possible Causes--
	- Harness routing.
	- Charging circuit.
	- Damaged CMP.
	- Damaged PCM.

Note: Electrical noise detected.

Incorrect base Cam timing.

CMP sensor / wiring

===END OBDII DTC P0341-P===

===IC DTC None===
Successful DTC reading, no error codes found

Module: Instrument Cluster

===END IC DTC None===

===RCM DTC None===
Successful DTC reading, no error codes found

Module: Restraint Control Module

===END RCM DTC None===

===GEM DTC None===
Successful DTC reading, no error codes found

Module: Generic Electronic Module

===END GEM DTC None===

===ABS DTC None===
Successful DTC reading, no error codes found

Module: Antilock braking system

===END ABS DTC None===