Replacement wheel nuts on a 2010 focus 1.6 tdci

[bigup]

Hey all.

im am after a set of one piece solid wheel nuts for each wheel as some of the ones I have now have missing caps so the look ugly. (Plus without the caps they are 18mm)

The locking nuts are fine, so I need 16 normal ones.

the car has the original ford alloys on and the nuts are them silly designed cone shaped with the thin metal caps that get easily destroyed . I believe I need to get some with a captive washer too.

I’ve found these: https://www.ebay.co.uk/itm/16-Replacement-Wheel-Nuts-M12-x-1-5-With-Captive-Washer-NS202B-CW-WNA16-a/361632227920?fits=Car+Make%3AFord|Model%3AFocus|Cars+Year%3A2010|Plat_Gen%3AMK+II|Cars+Type%3A1.6+TDCi|Variant%3AMK+II+[2004-2016]+Estate&hash=item5432f5e250:g:PPgAAOxyVLNSoyo5

would these work ok ?

my car is a focus mk2 1.6tdci 2010, zetec, 110bhp estate.

thanks. 

[Simon_K]

Looks about right. I replaced mine with these:

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F261970738635

And they fit standard titanium multi spokes. 

[bigup]

7 hours ago, Simon_K said:

Looks about right. I replaced mine with these:

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F261970738635

And they fit standard titanium multi spokes. 

Thanks mate. 

My alloys are like these : 

 

 

Assume the wheel nuts will be ok?

[Simon_K]

I suspect they are same across ford models,  but I’m no expert. Someone more knowledgable may be able to confirm. 

[Micro]

Similar to the ones I bought. The protective "Zinc" sacrificial coating hasn't however lasted and they do look quite a dull grey colour now, but at least I can get the buggers off!