Smartd00d

Mk8 Forscan chat

Recommended Posts

Sorry to hear that.. I will make some photos from the fuse box tomorrow. Is that the one in the engine bay? The manual shows this too btw, maybe it shows the correct fuse? You would expect it to work, at least the other buttons.

@abcdeeeeff; I will try to do that later this week, there are a lot of options but most don’t really add something unless you have the hardware. The one for the sync system is quite useful though, and let’s you add climate control or colored buttons. I will try to take some photos soon!

 

Share this post


Link to post
Share on other sites
 

Thanks for answering @Martijn89

The owners manual says that the fuse should be number 22.

 

ESP.thumb.PNG.347df1265563fe1b4846f7893a2c7e74.PNG

esp1.thumb.PNG.0302092fc2f3b7916effdbeca603709c.PNG

Translation: Steering wheel module. Instrument panel. Data Link connector.

According to the manual, this fuse is in the passenger compartment fuse box.

I can not think of another option seeing the other fuses.

I'll try again tomorrow.

BR

 

 

 

Share this post


Link to post
Share on other sites
22 hours ago, Martijn89 said:

 

@abcdeeeeff; I will try to do that later this week, there are a lot of options but most don’t really add something unless you have the hardware. The one for the sync system is quite useful though, and let’s you add climate control or colored buttons. I will try to take some photos soon!

 

@Martijn89 did you add climate control on the touch screen? Did you manage to keep stereo/surround option? 

Share this post


Link to post
Share on other sites
On 2/13/2019 at 8:00 PM, Martijn89 said:

Sorry to hear that.. I will make some photos from the fuse box tomorrow. Is that the one in the engine bay? The manual shows this too btw, maybe it shows the correct fuse? You would expect it to work, at least the other buttons.

@abcdeeeeff; I will try to do that later this week, there are a lot of options but most don’t really add something unless you have the hardware. The one for the sync system is quite useful though, and let’s you add climate control or colored buttons. I will try to take some photos soon!

 

Thank you!

If needed I have the CC option too, but at the moment I don't know when will I have some spare time to take photos of the fuses.

Share this post


Link to post
Share on other sites

Hi guys, i finally found some time to play a bit and enabled autolock. I was able to enable it in IPC too. I also enabled low washed fluid but haven't tested if it actually works. 

I found some options that i want to check if anything happens.Here is the list.

Rain Sensing Wipe
Mirrors Tilt on Reverse
Rain Sensor
Auto Stop Start
2 - way remote keyless entry
My view performance screen

I dont know if anyone has tested these options? Maybe there are sensors preinstalled for keyless entry or rain wipe. Also is it possible to have start stop disabled as starting value?

 

Share this post


Link to post
Share on other sites

Hi guys, i finally found some time to play a bit and enabled autolock. I was able to enable it in IPC too. I also enabled low washed fluid but haven't tested if it actually works. 
I found some options that i want to check if anything happens.Here is the list.
Rain Sensing Wipe
Mirrors Tilt on Reverse
Rain Sensor
Auto Stop Start
2 - way remote keyless entry
My view performance screen
I dont know if anyone has tested these options? Maybe there are sensors preinstalled for keyless entry or rain wipe. Also is it possible to have start stop disabled as starting value?
 


Not the same car, but on my Jaguar, mirror dip on reverse required seat memory pack. Would be great if that works without it as I miss it!


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Mirror tilt on reverse would be awesome - it's about the only extra I could do with on mine.

Share this post


Link to post
Share on other sites

Ok i can confirm that low washer fluid warning is not working. I just threw all the water but nothing happened..

Share this post


Link to post
Share on other sites

I guess that requires a sensor which isn't fitted. Likewise the keyless entry would need the handles with sensors. There is a chance mirror tilt and my performance screen might work?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now