Clear Or Tinted

[Baza7]

That is the Q,,,,,,,,
Hi all my daughter has  Ford Focus Titanium Auto 1.6 Petrol,,,2009, it has a broken

passenger side rear qtr glass,and i cant tell if its clear or tinted,so is there anyway i can

tell,ie code numbers,also where would be the best place to get a second hand one.

Thanks in advance,one demented Dad

 

 

[Jonro2009]

If you enter the VIN into the Ford ETIS site it should tell you there. You will have to register though. I have a registration, if you want to PM me the VIN I can have a look?

[Baza7]

Hi,thanks for your kind offer,i'll try and sort it tomorrow,and send you the VIN No
Cheers Baza

[mastachaz]

If its black ten tinted simple 

[JW1982]

All Focus MK2 windows are tinted. 

Apart from the black privacy glass all Focus MK2 rear/side windows are the same.

[Jonro2009]

On 7/14/2018 at 10:34 PM, Baza7 said:

Hi,thanks for your kind offer,i'll try and sort it tomorrow,and send you the VIN No
Cheers Baza

I have had a look on Etis for you and as @JW1982 has said the glass in tinted, not plain. Don’t confuse this with ‘privacy glass’ which is the glass that has the obvious tint. 

So you will need a quarter glass that is tinted 👍

is it too soon to make jokes about robbing scousers lol (originally from Maghull myself)

 

jon 

[mastachaz]

all focus are factory tinted 🙂

 

have a look here https://www.ebay.co.uk/itm/Ford-focus-2009-N-S-passenger-side-rear-window-glass-door-glass/173405155798?hash=item285fc0b1d6:g:KDkAAOSwjCZbRZf5

i mean privacy 🙂

[Baza7]

Top draw fella's,thanks for all your help,mastachaz its the small rear qtr glass i'm after,

but thanks for looking 👍

Jonro thanks for the info mate,skit away mate,i'm across the water

Update as we go ok

[Baza7]

Ok the glass came today,it needs the sealant removing,but apart from that it looks ok,
so the Q is has anyone ever fitted one,,,,ie do i need to take out the interior trim,and

do i need to use the correct sealant or will any do ????

Thanks again for the advice 👍

[mastachaz]

50 minutes ago, Baza7 said:

Ok the glass came today,it needs the sealant removing,but apart from that it looks ok,
so the Q is has anyone ever fitted one,,,,ie do i need to take out the interior trim,and

do i need to use the correct sealant or will any do ????

Thanks again for the advice 👍

good question 🙂 think you need special salant , and no dont remove any trim as i read they hard to put back

[Baza7]

Hi folks,well the glass is in,jobs a gudun,bit of a PITA cutting the old glass
out,and trimming the old sealer of new glass,but got there in the end,
it took me about six hours,with lunch and coffee breaks 👍
Anyway till the next time,thanks for all your comments and help,
Drive Safe Baza

[Jonro2009]

NIce one 👍