RehabBreach

2012 Ranger 2.2 Duratorq 150 PS 1st & 2nd gear troubles

Recommended Posts

Hi all

Got the above, 1st and 2nd gear have slowly been getting harder to get and now it will go in to reverse without lifting the gate up!

I have heard the A frame bolts come loose so have checked these and they are tight.

Any ideas what else to check?

Thanks in advance.

RB

Share this post


Link to post
Share on other sites
 

Don't know if this may help but I've lost one of the screws, the left one marked HB1 below, that links the lever's ball joint to the top of the gearbox, lever suddenly became loose. I recover the screw half way between home and work, try to put it back in place but I think the thread in the gearbow cast was a bit damaged and as the screw is not completely threaded, it wouldn't engage, I've had to use a standard M8 screw.

Hope this helps

ED

France

K024686604.gif

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.