Luntroni

Firmware upgrade of TravelPilot NX to SP 5.3

Recommended Posts

I have a big problem getting firmware update to SP 5.3 to start updating.
Which is about to drive me crazy.

TravelPilot NX runs without problems with 2009 map DVD.
But I have bought a new 2018 map DVD but there are problems saving destinations and more...
An update of the firmware is therfore needed.


Have deleted all stored/saved destinations and cleared & set it to factory default.
Turns on the engine and removes the old 2009 country map DVD and puts the Firmware 5.3 CD-R into the DVD drive.
And nothing happens. !!

Also tried with presning the 'NAV' button. But then it just writes insert a Navigation DVD/map in the drive.

Have tried with many reburning of CD-R (also tried with DVD-R's).

 

Have even been at the local Ford dealer & workshop, they have the same problem. (Note the Ford dealer have once before seen same issue on another NX)

 

Is there a way to force the update to start, or is the firm/software (B) locked against updating, and if, how to get around this?

 

Hope someone can help with this issue.

br.

Luntroni

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.