KayakJon

Parking sensors isolator

Recommended Posts

 

Has anyone ever retro fitted an isolator switch for parking sensors, on a 2003 fusion?

 I’m going to fit a detachable towbar, but want to be able to switch off the sensors when reversing a trailer.

Does anyone know where the bleeper for the sensors is ? Might be easier to switch off to bleeper.

Share this post


Link to post
Share on other sites
 

Bleeper is in the boot, Front upper left behind the nearside rear passenger seat and underneath the parcel shelf support.. At least on a late Titanium it is.

Find it by turning the ignition on, but not starting, then put it into reverse with the boot open, by standing at the back of the car you will set off the bleeper.

In the Haynes book, it shows that the parking aid is connected to the trailer control unit,  but you would not have that.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.