Induction kit for 1.4TDCi

[Ajsski99]

Hey all, new here so go easy 😂

Picked my 2008 Fusion 1.4TDCi today, and wanting to make it a bit zippier!

Was thinking of getting an induction kit for it, just a cheap one off eBay most likely, nothing too expensive or serious as it's only a Fusion haha.

Would this be the best course of action? If so all help will be much appreciated with tips on what one to get and how to fit it etc.

Probably going to get a Remap and carbon clean done by a local mobile chap down near me too so that should be really good for the car and release some locked up power :).

 

All answers are much appreciated, Ajsski99

[Paulkp]

What do you mean "..only a Fusion haha" - fantastic functional car, or as a certain Mike Brewskie put it, "a Fiesta with extra inches!"

I'd post your request in the Fiesta section, as I would think the Fiesta owners might know the answer.

[TomsFocus]

A cheap cone filter will lose you power, although you'll get a bit more noise if that's what you're after.

If you want more power just go straight for a stage 1 remap.  

[Ajsski99]

On 4/14/2019 at 6:36 PM, Paulkp said:

What do you mean "..only a Fusion haha" - fantastic functional car, or as a certain Mike Brewskie put it, "a Fiesta with extra inches!"

I'd post your request in the Fiesta section, as I would think the Fiesta owners might know the answer.

Thanks for the reply mate, sorry mine is a little later!

I'll post there and see what responses i get :)

[Ajsski99]

On 4/14/2019 at 7:57 PM, TomsFocus said:

A cheap cone filter will lose you power, although you'll get a bit more noise if that's what you're after.

If you want more power just go straight for a stage 1 remap.  

Been told i can get about 95bhp from a stage 1 map, sounds good to me! 🙂

Thanks for the reply.

[dlevick]

complete novice here - where would i get a re-map done?