Greg29

Refitting Focus MK2 Zetec S Facelift headlights

Recommended Posts

Hi all,

Recently purchased a Focus MK 2 Zetec S, have changed headlight bulbs and I have noticed the nearside headlight unit does not go back in place properly.

I have a 1cm approx gap between the unit and the top of the bumper. 

I have taken the unit in and out again but to no avail.

Offside unit went back in no problem. Is each unit refitted differently?

Any advice greatly appreciated.

Share this post


Link to post
Share on other sites
 

Have you checked that the bottom mounting arm is seated properly?
Iirc the arm can be removed from the light unit and may not be pushed in correctly.
02f87f173d40417b4c1f2cb13b5f256b.jpg

Sent from my SM-G965F using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.