Hewe Posted August 18, 2019 Share Posted August 18, 2019 Hi I have just replaced my coolant sensor on Ford Fusion it worked for a few hours, then the temperature gauge stopped working,maybe a dud sensor .or could there be a some thing else coursing the problem,thank you . Keith Quote Link to comment Share on other sites More sharing options...
Paulkp Posted August 18, 2019 Share Posted August 18, 2019 See thread in Fiesta, EdGasket is also having fun with his. When you say "the temperature gauge stopped working", do you mean shows hot or cold ? If cold I would check your connections. Is the CTS from Ford, or another supplier ? Quote Link to comment Share on other sites More sharing options...
Hewe Posted August 18, 2019 Author Share Posted August 18, 2019 It’s not reading,at all ,I got the sensor from amazon,Chinese i think,it did work for a while about a hour . Engine warning light is on. Thank you for your reply Quote Link to comment Share on other sites More sharing options...
EdGasket Posted August 19, 2019 Share Posted August 19, 2019 You need to measure the resistance across the sensor; should be around 40K ohm or more at ambient. You need to get an obd2 code reader and see what code was logged and then clear it. Maybe the sensor has gone short or open circuit and the check light is on because of a logged fault code re. the temp sensor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.