Ford Mudflaps

[LIAM ADAMS]

Hi all, I brought these Mudflaps link below for my mk6 fiesta but the body work is to thin on the rear does anyone know where I could get some brackets or something to get them on the car,

https://www.amazon.co.uk/LK-Mudflaps-Including-Hardware-Required/dp/B07FKTHQ9K/ref=mp_s_a_1_3?keywords=Ford+Mudflaps&qid=1566995703&s=gateway&sr=8-3

thanks in advance liam 

[AlMcL]

My son fitted a set to his Fiesta, self tapers into the bumper and silly aluminium brackets that screwed onto the wheel arch liner. It was the same front and back. Not sure if the brackets are available separately though, might be worth searching eBay. 

[Lenny]

On 8/28/2019 at 1:38 PM, LIAM ADAMS said:

Hi all, I brought these Mudflaps link below for my mk6 fiesta but the body work is to thin on the rear does anyone know where I could get some brackets or something to get them on the car,

https://www.amazon.co.uk/LK-Mudflaps-Including-Hardware-Required/dp/B07FKTHQ9K/ref=mp_s_a_1_3?keywords=Ford+Mudflaps&qid=1566995703&s=gateway&sr=8-3

thanks in advance liam 

Get some stainless steel "penny washers" from eBay in various diameter M4, M5 etc.

https://www.ebay.co.uk/itm/PENNY-REPAIR-WASHERS-A2-STAINLESS-STEEL-FOR-METRIC-BOLTS-SCREWS-M4-5-6-8-x-25mm/180971712910?ssPageName=STRK%3AMEBIDX%3AIT&var=480191259121&_trksid=p2057872.m2749.l2649 

There outter diameter remains the same just the centre hole differs, 

I recommend fitting one on both sides of the rear arch if possible prior to bolting or securing tight cant say the other operative word as its banned on here lol

Overall the penny washers will broaden the grip surface, reducing the risk of pulling off 

[Lenny]

Also while on Ebay; you might like these lol I've bought a set for my mates mk1 Toyota yaris they look good and function correctly 

https://www.ebay.co.uk/itm/3-in-1-Car-Mechanics-Quartz-Clock-Digital-Watch-thermometer-Hygrometer-Luminous/323773938627?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 

I've also fitted custom flaps to my focus in similar fashion see guide: 

 

[LIAM ADAMS]

Thanks for the help I'll take another look today 

[LIAM ADAMS]

Hi all, this is what mine looks like bit different to the focus as screw layout is different might still work but open for suggestions, can I move screws already their? 

[LIAM ADAMS]

Hi all thanks for all you help managed to get them on front went on fine but the back I made some brackets from scratch and they seem fine, thanks again Liam