funkybassman

Fusion parking sensors

Recommended Posts

Parking sensors on my fusion go nuts for no apparent reason. Anyone else had this or can anyone suggest a direct fit replacement??

Share this post


Link to post
Share on other sites

Touch wood - not had any problem on a '60 plate Titanium.  Control box all dry and connections OK ?

I have put a set of "Dolphin" sensors on a 57 plate Fiesta, not the cheapest but looks like a good kit and work well so far.  They appear to have three very similar websites!  The sensors are available in "matching" colours, two sizes and match my sea grey bumper very well.

https://www.parkingsensors.co.uk/

https://www.dolphin-direct.co.uk/

https://www.dolphinparkingsensors.co.uk/

To change the sensors on the Fusion, you will probably need to drill out the four black rivets when you remove the bumper, then you will need a set of "Lazy Tongs" pop riveter to fit it back on!

Share this post


Link to post
Share on other sites

very pleased with the Dolphin kit I fitted, look better than my neighbours set fitted by the local Ford dealer but they can be susceptible to giving a constant beep if they are a bit dirty or wet, just a quick wipe over with a cloth or just a finger seems to solve the problem, assume all sensors need to be clean and dry. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.