Jump to content
Do Not Sell My Personal Information


Sync3 update to version 3.4


Tezza
 Share

Recommended Posts

1 hour ago, Tezza said:

Yes Mate

Luke i used these 

SBL, GB5T-14G376-AA.VBF
1U5T-14G374-DA.VBF
1U5T-14G375-HA.VBF
GB5T-14G379-AA.VBF
JB5T-14G379-BA.VBF

cheers bud, I get an error in ucds though when loading them to flash, all state ready apart from 1u5t-14g375-ha which says error?

Link to comment
Share on other sites


5 minutes ago, Tezza said:

Luke,

Select focus 2015 mca- 2015.5

Still the same mate, how big was your file? mine is only 1kb 

Link to comment
Share on other sites

1 minute ago, Luke_Anderson said:

Still the same mate, how big was your file? mine is only 1kb 

 (773,806 bytes)

 

Link to comment
Share on other sites


any chance you could send it to me? mines only coming up at 709 bytes 

 

Link to comment
Share on other sites

thanks mate, sadly that is what i already had, i think i know the problem, my ucds is a ucds pro+ (aka a fake one) i dont believe the software is new enough to support that file.

Link to comment
Share on other sites

3 minutes ago, Luke_Anderson said:

thanks mate, sadly that is what i already had, i think i know the problem, my ucds is a ucds pro+ (aka a fake one) i dont believe the software is new enough to support that file.

cant you just download the latest version off the web site ?

 

Link to comment
Share on other sites

well the fake versions are non updatable, think it just renders the adaptor useless. 

Link to comment
Share on other sites

1 minute ago, Luke_Anderson said:

well the fake versions are non updatable, think it just renders the adaptor useless. 

That just sucks lol  but with the fake one you can do most thing's i guess ? like direct config etc

 

Link to comment
Share on other sites

To be honest with the fake ucds I havent found anything I couldnt already do on forscan. 

Link to comment
Share on other sites

So, does anyone in east anglia have a genuine Ucds I can use? 😂

Link to comment
Share on other sites

What do those things cost? Been tempted lately but not quite understanding which tier of package I'd need.

Link to comment
Share on other sites

12 minutes ago, Phil21185 said:

What do those things cost? Been tempted lately but not quite understanding which tier of package I'd need.

Had mine nearly 5 years and its the extended licence you need as you get full potential of the program,  cost me £160 

  • Thanks 1
Link to comment
Share on other sites


11 hours ago, Tezza said:

Had mine nearly 5 years and its the extended licence you need as you get full potential of the program,  cost me £160 

Thanks Tezza. I understand you need tokens as well or something? Or is that for more specialist operations like mileage adjustment?

Link to comment
Share on other sites

2 hours ago, Phil21185 said:

Thanks Tezza. I understand you need tokens as well or something? Or is that for more specialist operations like mileage adjustment?

The adaptor will come with 1 credit as it needs 1 to let you use the program and yes you need credits for certain operations but not that you will need to use them 

Link to comment
Share on other sites

Apparently station logos work on 3.3 - does anyone have the forscan details for it?

 

Thanks!

Link to comment
Share on other sites

14 minutes ago, vibeone said:

Apparently station logos work on 3.3 - does anyone have the forscan details for it?

 

Thanks!

Did you miss the link on page 3 ??

Link to comment
Share on other sites

30 minutes ago, Tezza said:

Did you miss the link on page 3 ??

I did indeed - apologies. In my defence, it felt like I checked this thread on saturday morning and evening and we'd managed to add 3 pages to it 😄

I'm tempted to go to 3.4 anyway, but I'm worried about warranty without a clear route back to 3.3  And future updates too.  I'm officially on 3.3, so I think that means I can skip the reformating bit, but the route back (or forwards) still seems a bit scary.

 

Link to comment
Share on other sites

49 minutes ago, vibeone said:

I did indeed - apologies. In my defence, it felt like I checked this thread on saturday morning and evening and we'd managed to add 3 pages to it 😄

I'm tempted to go to 3.4 anyway, but I'm worried about warranty without a clear route back to 3.3  And future updates too.  I'm officially on 3.3, so I think that means I can skip the reformating bit, but the route back (or forwards) still seems a bit scary.

 

With you being on 3.3 you will get the official 3.4 update its only people on 3.0 that might not get it 

  • Like 1
Link to comment
Share on other sites

42 minutes ago, Tezza said:

With you being on 3.3 you will get the official 3.4 update its only people on 3.0 that might not get it 

Yes it's more an impatience thing for me, but I'm trying hard to hold off!

Link to comment
Share on other sites

UPDATE! 

Right so I have updated the apim firmware. I asked the guys at Forscan for a copy of the 2.4.0 beta which has module firmware updating in it and they kindly sent me a link and it works really well! 

So i now have 19200 with logos and calm screen. Happy days. 

However, im still getting the Installation in progress warning everytime i start the car. 

@Phil21185 @Tezza

are you guys getting this error with just 19200 or with 19101 as well? 

Link to comment
Share on other sites

19 minutes ago, Luke_Anderson said:

UPDATE! 

Right so I have updated the apim firmware. I asked the guys at Forscan for a copy of the 2.4.0 beta which has module firmware updating in it and they kindly sent me a link and it works really well! 

So i now have 19200 with logos and calm screen. Happy days. 

However, im still getting the Installation in progress warning everytime i start the car. 

@Phil21185 @Tezza

are you guys getting this error with just 19200 or with 19101 as well? 

Luke,

That's great news I'm sure others will want to know how to do this without have to find someone with UCDS . I think I know why you still getting the installation message as I think its because you added the licence file as were I didn't

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...

Forums


News


Membership