fitted ecu holder so i could put air cone on was fine but when i fitted it the ecu wring was pulling on wiring round d=bottom hose on raditor now have a fault not all the time but now and then the dash light come on traction control and no accelerator does anyone which wire on the ecu will be lose

 if i move the wires it will work again fine for a while

i put old airbox back on to take tenstion of the wire but still does it 
or anyone got ecu wiring diagram focus mk2 2007 please as i do alot of motorway driving and not keen of breakdown in outside lane 

thank for you help lee 

Near top of focus forum there is focus mk2 wiring schematics. From memory I think it’s over 100 pages of wiring diagrams

Any chance you can paste the link can’t find it 

 

cheers 

 

Thank so much 👍👍👍

thank you for all your help all fixed it was due to the main plug on back of the clocks at fault got fixed £50 lighter but spot on now😀