mark71 Posted April 3, 2020 Share Posted April 3, 2020 hi can anyone help I wont to fit st150 rear beam to my 1.4 zetec I am pretty sure it will fit but the st has abs and my 1.4 is non abs can any advise me if this is a straight swap or would I need to do something with the abs regards mark Quote Link to comment Share on other sites More sharing options...
isetta Posted April 3, 2020 Share Posted April 3, 2020 Re abs. I would have thought it would not matter. Just leave the wires unconnected or remove sensors totally. But I do wonder if the balance between front and rear brakes might be out when you swap the stuff over Quote Link to comment Share on other sites More sharing options...
Nick_T Posted April 3, 2020 Share Posted April 3, 2020 Yup just take the sensors out or tie them up out the way, won't make any difference to the functionality of the brakes. I put an ST axle on my Zetec S and didn't notice any imbalance in the brakes even during the operation of ABS. Does stop well though! Quote Link to comment Share on other sites More sharing options...
mark71 Posted April 4, 2020 Author Share Posted April 4, 2020 cheer guys for the info Quote Link to comment Share on other sites More sharing options...
.thumb.png.327e57655a9a82472089ef077ae02c11.png)
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.