shiwarrior Posted May 23, 2020 Share Posted May 23, 2020 Hi all I thought there was a guide to change these to the better mk3 ones? I'm hoping it's easy to do, need to replace mine asap I should get it checked for blockages too, is it easy to do? I'm hardly getting any water through mine at all now Cheers Quote Link to comment Share on other sites More sharing options...
F0CUE Posted May 23, 2020 Share Posted May 23, 2020 Yes it's Here. Your washer pump may be on its way out but check the lines for leaks /clogs. 1 Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted May 24, 2020 Author Share Posted May 24, 2020 thanks Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted May 24, 2020 Author Share Posted May 24, 2020 being as the Garages are closed i assume i need 2 of these ? https://www.ebay.co.uk/itm/Genuine-Ford-C-Max-Mondeo-MK4-Focus-MK3-Windscreen-Washer-Nozzle-Jet-Kit-1708796/252765030576?epid=1509755422&hash=item3ad9f848b0:g:lpsAAOSwx6pYnlXW Quote Link to comment Share on other sites More sharing options...
F0CUE Posted May 24, 2020 Share Posted May 24, 2020 Yes that's the ones. Quote Link to comment Share on other sites More sharing options...
eddie eastwood Posted May 24, 2020 Share Posted May 24, 2020 Are yours the heated type IE:- with an electrical wire connected to them Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted May 24, 2020 Author Share Posted May 24, 2020 mines only a Zetec, im surprised they are heated Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted May 24, 2020 Share Posted May 24, 2020 They should be heated on a Zetec, along with the heated windscreen. It's only the Studio/Style where they were optional. As above though, it's not likely to be the jets at fault, there's a rubber filter over the pump that gets clogged with muck. It's that that you'll need to clean. Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted May 24, 2020 Author Share Posted May 24, 2020 thanks i want to replace the nozzles anyway, because they are crap! 1 Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted May 24, 2020 Share Posted May 24, 2020 Ok, you'll either have to put up without the heater function or pay a lot more then lol - https://www.ebay.co.uk/itm/Genuine-Ford-Focus-MK3-Windscreen-Washer-Wiper-Nozzle-Jet-Spray-Kit-1811013/272379145662?epid=2092351316&hash=item3f6b0fedbe:g:lukAAOSwvexaKoSW Quote Link to comment Share on other sites More sharing options...
Gymfocused Posted May 24, 2020 Share Posted May 24, 2020 I bought some from paintmodz in gloss black. The mist type is much better imho. Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted May 25, 2020 Author Share Posted May 25, 2020 they are over £40 each from them ! erm, no thanks 1 Quote Link to comment Share on other sites More sharing options...
Gymfocused Posted May 25, 2020 Share Posted May 25, 2020 2 hours ago, shiwarrior said: they are over £40 each from them ! erm, no thanks Fair enough but, you do pay for a great finish imho. Quote Link to comment Share on other sites More sharing options...
eddie eastwood Posted May 25, 2020 Share Posted May 25, 2020 +1 for the mist type. Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted May 25, 2020 Author Share Posted May 25, 2020 3 hours ago, Gymfocused said: Fair enough but, you do pay for a great finish imho. im sure they would be easy to do if i wanted a different colour, im quite happy withe standard looking ones , but thank you anyway 🙂 Quote Link to comment Share on other sites More sharing options...
WireyWhenWet Posted May 26, 2020 Share Posted May 26, 2020 I did this very thing on my 58(09) and it was the best thing I'd done, didn't need a pump upgrade, etc. The mist jets actually saved me money as they used a lot less fluid for more coverage and the heated bit was a bonus. They're about a couple of the only bits I took off before I PX'd lol, those, the wheels and the bulbs were about the best bits of that car! I'm so glad the newer ones are standard now, saves a bit of headache of putting up with naff ones and expense too for something so quick & simple.. Call me spoilt but it's definitely the little things like that.... 😅 Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted May 26, 2020 Share Posted May 26, 2020 Mist jets aren't even a new thing, they should've been standard on the Mk2 Focus really! Citroen Xsara's had mist jets in the late 90s, they were a common upgrade for the 306s...really cheap new at the Citroen dealer as well. I went through no end of them as I fitted them to pretty much every 306 I bought along with a set of Bosch Aerotwins! 1 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted May 26, 2020 Share Posted May 26, 2020 If anyone meeds a pair of original heated mist nozzles, I have a set from my previous car that were swapped out for painted ones.£10 for the pair so say £12 including postage.Sent from my SM-G965F using Tapatalk 5 Quote Link to comment Share on other sites More sharing options...
tommy1340millar Posted May 27, 2020 Share Posted May 27, 2020 20 hours ago, Stoney871 said: If anyone meeds a pair of original heated mist nozzles, I have a set from my previous car that were swapped out for painted ones. £10 for the pair so say £12 including postage. Sent from my SM-G965F using Tapatalk I'll buy these 😉 Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted May 27, 2020 Share Posted May 27, 2020 P/M me your postal details and I'll send you a paypal link.Sent from my SM-G965F using Tapatalk Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted May 27, 2020 Author Share Posted May 27, 2020 cool, thanks stoney i assume they are the MK 3 ones (heated) send me a PM and ill transfer the money 🙂 cheers 1 Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted June 8, 2020 Author Share Posted June 8, 2020 On 5/24/2020 at 2:12 PM, TomsFocus said: Ok, you'll either have to put up without the heater function or pay a lot more then lol - https://www.ebay.co.uk/itm/Genuine-Ford-Focus-MK3-Windscreen-Washer-Wiper-Nozzle-Jet-Spray-Kit-1811013/272379145662?epid=2092351316&hash=item3f6b0fedbe:g:lukAAOSwvexaKoSW i ordered some, but not those they are a different code to these ones : https://www.ebay.co.uk/itm/Genuine-Ford-C-Max-Mondeo-MK4-Focus-MK3-Windscreen-Washer-Nozzle-Jet-Kit-1708797/252770222112?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 says mk3 🙂 1 Quote Link to comment Share on other sites More sharing options...
shiwarrior Posted June 9, 2020 Author Share Posted June 9, 2020 i changed them both, still nothing coming out, eventually water started coming out, these nozzles are so much better, the system if working again, thought it was still a bit crap come out, so took it to my local, he cleaned the system for me, although its a lot better, i think the pump could do with a change easy job to do, even by my standards ! well worth the money, because now i got clean windows 🙂 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.