Ford Fiesta mk7.5 Front Spoiler

[TheBoss1511]

Hi All. I'm new to this forum. This has probably already been asked but cant find anything about it. Is it possible to install the Zetec S Front Spoiler to a standard Zetec. I know there are locating tabs on the Zetec S bumper. If it is possible. Are there any install guides on how to do this? Any info is much appreciated. Thanks in advance.

[Matt_Scotland]

Yes mate, there are tabs on the inside of the lower lip that only fit a Zetec s bumper so they need to be cut off. 
 

I attached mine using 5mm wide 3m tape. 
 

The other mounting points are behind the arch lining in the front wheels arch and under the bumper which the front lip clicks into. 
 

sounds difficult but it’s not. Just make sure you buy a front lip that has the 2 black plastic mounting brackets at each end. 
 

also make sure it comes with the small black splitter in the middle! They are expensive when purchased alone!

 

Heres a pic of mine when it’s done 

[TheBoss1511]

Thanks Matt_Scotland. I will definitely be giving it a go when I have some more funds and find one in colour.