Jump to content
Do Not Sell My Personal Information

Mondeo 2.5t 2007 not smooth


Bart88
 Share

Recommended Posts

Hi all,

When driving my mondeo i experience that the car is very difficult to drive smooth when changing gears.

 

I already fixed the acceleration shudder at 2500rpm by replacing the, maf,map,fps, boostsolenoid and new Bosch sparkplug. Under acceleration that was an big improvement.

Still the car is not smooth while changing gears ( the gearlever itself is very light and smooth).

Now i noticed when car in neutral, and reving from idle slowly up to 3000rpm at 2200-2500rpm I feel a vibration in the whole car.

Does this indicates more engine mounts or duall mass flywheel? Or perhaps something else?

Thanks in advance

Link to comment
Share on other sites


Nobody ever noticed this vibrations?

Link to comment
Share on other sites

Sounds like engine mounts to me. I had a similar issue though it was on my 2.0ltr zetec, it was the rear mount (roll restrictor). Eventually the rubber let go and the vibration changed to a thud at every gear change.

Sent from my I3113 using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

I have another side note for my problem!

When the engine is not fully warmed up the drive is much smoother.

So when the car is fully warmed up, the drive is not smooth.

Btw, when car is on ignition (not running) the etm is making a noise all the time. Is this normal? I already mechanically cleaned the etm

 

 

 

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership