Retro fitting reverse camera

[Mohoshin]

Hi All, new to the forums. I wanted to find out if i am able to fit a original ford reverse camera with minimal wiring and not touching the sync head unit ?

I believe if you have a spare grey connector in the boot area it makes it easier. i have the 8" sync 3 display. I am hoping all i need to do is install camera, use a harness to connect the camera to the grey connector and enable reverse camera option via forscan ? 

Grateful for any advice from those who have with retrofitting a reverse camera

[Mohoshin]

Just a further question, does the camera connection always have to be in the right hand side of the boot? As the connector i have posted a photo of is on the left side. Nothing on my right side.

[Tommo17]

Yes it’s on the right if right hand drive. And if it’s there then yes plug and play then activate.