Swearwolf Posted July 8, 2020 Share Posted July 8, 2020 Long story short - 2007 PFL Cmax, went to reflash my PCM as it had a shoddy remap done so wanted it back to standard. I've done this a fair few times on other fords so I've some experience. Got the correct AS BUILT data and saved VID block first, double checked part numbers and got the correct software. Using elmconfig I begin the update but as soon as it gets to the end it goes finishing...reboot...dtc clearing... then i get an error saying not supported. At this point it's wiped my old map and the PCM is blank so no starting and PCM not communicating with other modules. Elmconfig also says PCM type does not match the software (it does i've triple checked). Any advice? I've been at it 3 days now and I've got a replacement PCM coming just in case. Thanks! Quote Link to comment Share on other sites More sharing options...
pragmatix Posted July 8, 2020 Share Posted July 8, 2020 Sorry can't help ask in the general or Focus boards you will get a better response . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.