n_hudson Posted September 21, 2020 Share Posted September 21, 2020 I have an ABS, Traction Control warning The FORSCAN text file - ===PCM DTC P0670:00-6C=== Code: P0670 - Glow Plug Control Module 1 Control Circuit / Open Status: - DTC Maturing - Intermittent at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Powertrain Control Module ===END PCM DTC P0670:00-6C=== ===PCM DTC P037D:00-2C=== Code: P037D - Glow Plug Sense Circuit Status: - DTC Maturing - Intermittent at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Powertrain Control Module ===END PCM DTC P037D:00-2C=== ===OBDII DTC None=== Successful DTC reading, no error codes found Module: On Board Diagnostic II ===END OBDII DTC None=== ===SASM DTC None=== Successful DTC reading, no error codes found Module: Steering Angle Sensor Module ===END SASM DTC None=== ===ABS DTC C0034:15-20=== Code: C0034 - Right Front Wheel Speed Sensor Additional Fault Symptom: - Circuit Short To battery Or Open Status: - Malfunction Indicator Lamp is Off for this DTC Module: Antilock braking system Freeze Frame : -GLOBTIM: 237703643 s - Global real time -TOTDIST: 0.0 km - Total Distance -MAINECUV: 11.75 V - Main ECU voltage supply -OUTTMP: -40 °C - External Temperature From Sensor ===END ABS DTC C0034:15-20=== ===ABS DTC U0100:00-68=== Code: U0100 - Lost Communication With ECM/PCM A Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Antilock braking system Freeze Frame : -GLOBTIM: 189983599 s - Global real time -TOTDIST: 119300.0 km - Total Distance -MAINECUV: 14.25 V - Main ECU voltage supply -OUTTMP: 23 °C - External Temperature From Sensor ===END ABS DTC U0100:00-68=== ===ABS DTC C0037:4A-68=== Code: C0037 - Left Rear Wheel Speed Sensor Additional Fault Symptom: - Incorrect Component Installed Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Antilock braking system Freeze Frame : -GLOBTIM: 252594470 s - Global real time -TOTDIST: 0.0 km - Total Distance -MAINECUV: 12.25 V - Main ECU voltage supply -OUTTMP: -40 °C - External Temperature From Sensor ===END ABS DTC C0037:4A-68=== ===ABS DTC C0037:07-68=== Code: C0037 - Left Rear Wheel Speed Sensor Additional Fault Symptom: - Mechanical Failures Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Antilock braking system Freeze Frame : -GLOBTIM: 252518400 s - Global real time -TOTDIST: 178639.0 km - Total Distance -MAINECUV: 14.25 V - Main ECU voltage supply -OUTTMP: 23 °C - External Temperature From Sensor ===END ABS DTC C0037:07-68=== ===ABS DTC C0037:11-68=== Code: C0037 - Left Rear Wheel Speed Sensor Additional Fault Symptom: - Circuit Short To Ground Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Antilock braking system Freeze Frame : -GLOBTIM: 252515399 s - Global real time -TOTDIST: 178541.0 km - Total Distance -MAINECUV: 14.00 V - Main ECU voltage supply -OUTTMP: 23 °C - External Temperature From Sensor ===END ABS DTC C0037:11-68=== ===RCM DTC None=== Successful DTC reading, no error codes found Module: Restraint Control Module ===END RCM DTC None=== ===PAM DTC U0415:86-28=== Code: U0415 - Invalid Data Received from Anti-Lock Brake System (ABS) Control Module A Additional Fault Symptom: - Signal Invalid Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Parking Aid Module Freeze Frame : -GLOBTIM: 215324017 s - Global real time -TOTDIST: 144077.0 km - Total Distance -MAINECUV: 14.25 V - Main ECU voltage supply -INCARTMP: 23 °C - In car temperature -OUTTMP: 23 °C - External Temperature From Sensor ===END PAM DTC U0415:86-28=== ===PAM DTC U100B:00-28=== Code: U100B - Semi-Automatic Parallel Parking System Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Parking Aid Module Freeze Frame : -GLOBTIM: 215324017 s - Global real time -TOTDIST: 144077.0 km - Total Distance -MAINECUV: 14.25 V - Main ECU voltage supply -INCARTMP: 23 °C - In car temperature -OUTTMP: 23 °C - External Temperature From Sensor ===END PAM DTC U100B:00-28=== ===HCM DTC B1C99:13-64=== Code: B1C99 - Right Corner Lamp Circuit Additional Fault Symptom: - Circuit Open Status: - DTC Maturing - Intermittent at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Headlamp Control Module ===END HCM DTC B1C99:13-64=== ===PSCM DTC U0415:00-08=== Code: U0415 - Invalid Data Received from Anti-Lock Brake System (ABS) Control Module A Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC Module: Power Steering Control Module Freeze Frame : -GLOBTIM: 252917127 s - Global real time -TOTDIST: 178993.0 km - Total Distance -MAINECUV: 14.25 V - Main ECU voltage supply -OUTTMP: 23 °C - External Temperature From Sensor -PWR_MODE_KEY: Running - Power Mode Key State -PWR_MODE_QF: Power Mode OK - Power Mode Quality Factor -SSHFT_TQ_S2: -1.9 Nm - Steering Shaft Torque Sensor #2 -MOD_SUP_V: 14.30 V - Module Supply Voltage -PSCM_INT_TEMP: 19 °C - PSCM Internal Temperature -VSS: 16.0 km/h - Vehicle Speed -DLA_SED_FD0B_PID: 204 - DL_SED_FD0B_PID -DLA_NUM_FD0C_PID: 0.00 A - DL_NUM_FD0C_PID -DLA_NUM_FD0D_PID: 0.00 A - DL_NUM_FD0D_PID -DLA_NUM_FD0F_PID_1: 0 1/min - DL_NUM_FD0F_PID_1 ===END PSCM DTC U0415:00-08=== ===BCMii DTC B1D01:15-68=== Code: B1D01 - Right Low Beam Additional Fault Symptom: - Circuit Short To battery Or Open Status: - Previously Set DTC - Not Present at Time of Request - Malfunction Indicator Lamp is Off for this DTC - Test not complete Module: Body Control Module Freeze Frame : -GLOBTIM: 231738939 s - Global real time -TOTDIST: 160121.0 km - Total Distance -MAINECUV: 14.75 V - Main ECU voltage supply -INCARTMP: 80 °C - In car temperature ===END BCMii DTC B1D01:15-68=== Quote Link to comment Share on other sites More sharing options...
n_hudson Posted September 21, 2020 Author Share Posted September 21, 2020 Ive taken out the Front Right (Drivers) sensor, cleaned it and the area around it and the hole it drops into. Had the rear left (passengers) sensor, cleaned it etc.. I also took off the under panelling and checked the lengths of wiring exposed front and rear, no obvious breaks or kinks. I drove the car, the faults cleared themselves.... after about 15 minutes, the lights came back on. Quote Link to comment Share on other sites More sharing options...
n_hudson Posted September 22, 2020 Author Share Posted September 22, 2020 Any reason why the FRONT RIGHT and REAR LEFT would BOTH be showing faults??? Quote Link to comment Share on other sites More sharing options...
nicam49 Posted September 22, 2020 Share Posted September 22, 2020 Front right and rear left are on one brake circuit, and front left and rear right are on the other brake circuit. So if a hydraulic pipe fractures you've still got some braking.power. Quote Link to comment Share on other sites More sharing options...
n_hudson Posted September 22, 2020 Author Share Posted September 22, 2020 1 hour ago, nicam49 said: Front right and rear left are on one brake circuit, and front left and rear right are on the other brake circuit. So if a hydraulic pipe fractures you've still got some braking.power. That makes sense, I guess. i swapped the front sensors left/right and cleared the codes. Now only rear left is showing a fault code. I’m wondering if I messed up and didn’t clear old codes, so they might have been historic. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.