EDIS 4 help...new member

[jonathan1]

Hi...new member hoping someone can help. First off, an admission. I don't own an Escort, but I do own an EDIS 4, which resides in the engine bay of a VW 1776 aircooled bus.

I decided to convert to crank-fired ignition using a Megajolt/Edis set up. The guy who chopped the pigtails from the Edis connector mustn't've been feeling too generous that day so I'm left with about 10mm of wire to play with. Fine if it's on the bench, not great when you're inside the engine bay trying to re solder some dodgy connections. So I'd like to rewire the EDIS connector 'plug' using new pins and longer cable. By 'plug' I mean the male portion that plugs in, rather than the female receptor. Can't seem to find the right code or product number for the pins/terminals and Vehicle Wiring Products can't tell me off the bat; they'd like to see some photos....

 

I'm hoping someone on here is familiar with the terminals and can't point me in the right direction?

 

Thanks in advance, Jonathan