Setting Navigation

[Hostahousey]

Anyone know the easy way to set a destination on the satnav. Why does it NOT give you the full amount of letters to set up a post code. It took longer to fix a destination than the time to get there. Baaaaaa

[mickter]

Agree,they are not the easiest to use.

[Stoney871]

Try putting a space between the two parts of the postcode.
Am I correct it's sync2?, sounds like it by the problem you're having.
Luckily sync3 addressed (no pun intended) this problem.

Sent from my SM-G965F using Tapatalk

[pragmatix]

Can you use voice on sync2?

[Hostahousey]

19 hours ago, Stoney871 said:

Try putting a space between the two parts of the postcode.
Am I correct it's sync2?, sounds like it by the problem you're having.
Luckily sync3 addressed (no pun intended) this problem.

Sent from my SM-G965F using Tapatalk
 

HI Stoney, That's part of the problem it only lets me put the first letter of the postcode. Example I tried to put an Harrogate code into it, it only let me put in the ' H ' then pre-empted my destination with 3 alternative's which were not right. As for sync 2 or 3 I don't know, mines a 2016 maybe you can tell me what sync it is ?

[pragmatix]

@Hostahousey if you go into setting /general/ about and   it will tell you what version of sync you have.

I suspect as it's a 2016 car it will be 2.

[Hostahousey]

On 9/25/2020 at 12:48 PM, pragmatix said:

@Hostahousey if you go into setting /general/ about and   it will tell you what version of sync you have.

I suspect as it's a 2016 car it will be 2.

Thanks for that ,will do.