Master clutch cylinder

[Stevengraham1989]

Hi all 

Notice the floor was wet , looked up to find the master clutch cylinder leaking 

 

Is it a hard job to do ? 

[isetta]

i've done one on same era fiesta (2004) which i think is much the same but not 100% certain. the cylinder was pretty cheap (mine was plastic). It was not a technically hard job to do but you need to be a bit of a contortionist to get up under the dash to remove the bolts holding the cylinder on.   I've seen it said many times they are really hard to bleed but I have not had that problem.

[Stevengraham1989]

11 hours ago, isetta said:

i've done one on same era fiesta (2004) which i think is much the same but not 100% certain. the cylinder was pretty cheap (mine was plastic). It was not a technically hard job to do but you need to be a bit of a contortionist to get up under the dash to remove the bolts holding the cylinder on.   I've seen it said many times they are really hard to bleed but I have not had that problem.

Thanks for your input mate 

Been looking and it doesn't look to hard ( I've done worst jobs ) 

I'm going to do it next weekend , and will report back 

 

Thanks again mate