smurf1984 Posted January 20, 2021 Share Posted January 20, 2021 hiya guys i have a 2010 titanuim i have powerfold mirrors that work with button in the car but is there any way to make the powerfold off the key??? Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted January 21, 2021 Share Posted January 21, 2021 Late Mk2 facelift yes? There's no simple way to do it via dashboard settings. But you can do it via an expensive piece of software (NOT Forscan or ELMConfig). I can't remember the name of it annoyingly, but a guy on the ST forum used to post his out for a small fee. Quote Link to comment Share on other sites More sharing options...
smurf1984 Posted January 21, 2021 Author Share Posted January 21, 2021 yes mines a late facelift and cheers for the reply and info buddy Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted January 21, 2021 Share Posted January 21, 2021 No worries. It is a bit annoying as the Mk3 uses exactly the same mirrors but they were programmed to fold on the key as standard. It was one of the things I meant to do on my Mk2 facelift but never did get round to it before buying a Mk3. Quote Link to comment Share on other sites More sharing options...
smurf1984 Posted January 21, 2021 Author Share Posted January 21, 2021 tell me about it why didnt they leave it like the mk4 mondeo u only had to change door module 1 Quote Link to comment Share on other sites More sharing options...
DaveT70 Posted January 21, 2021 Share Posted January 21, 2021 Hi, If it's not in your setting menu on your cluster then it will probably need configuring in the BCM using a program like Forscan and a suitable cable connected to you OBD port Quote Link to comment Share on other sites More sharing options...
DaveT70 Posted January 21, 2021 Share Posted January 21, 2021 Just now, DaveT70 said: Hi, If it's not in your setting menu on your cluster then it will probably need configuring in the BCM using a program like Forscan and a suitable cable connected to you OBD port Sorry, just seen replies. It must be UCDS then?? Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted January 21, 2021 Share Posted January 21, 2021 25 minutes ago, DaveT70 said: Sorry, just seen replies. It must be UCDS then?? Yes, that's the one, UCDS. Quote Link to comment Share on other sites More sharing options...
smurf1984 Posted January 21, 2021 Author Share Posted January 21, 2021 do i have to update software or do i just enable using ucds? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.