Hello, my girlfriend has a Mk2 Focus ST3 Pre Facelift. Its seldom used, its on 151k and has no service history..... however it runs well and suprisingly clean and weve decided to turn it into a bit of a project. Mechanically, Im not getting involved, its going to a friend who is a specialist for a Service/Cambelt/block mod and a once over with a fine tooth comb. However. Im concentrating on the tidying up myself..... going to start with the interior:

I need some help with the following:

Im after a genuine new gear knob/gear gaitor. Anyone got a part number?

The car is also fitted with what I believe is a factory car phone kit. Its bolted too the cup holder. Im guessing this requires the centre console removing? Any guides knocking about. 
 

Also. The 3 gauge pod is loose, easy to tighten? 
 

thanks

 

1 hour ago, Kpowell911 said:

Im after a genuine new gear knob/gear gaitor. Anyone got a part number?

When you see the price of these you'll probably say something like "actually my current one will be fine" 😂
Gear knob - 1373779
Gater - 1382856

1 hour ago, Kpowell911 said:

The car is also fitted with what I believe is a factory car phone kit. Its bolted too the cup holder. Im guessing this requires the centre console removing? Any guides knocking about. 

There was no factory phone holder included on these. You have to remember though, the iPhone didn't exist in 2006 lol.
The centre console isn't hard to remove, however a few of the screws are hidden away. I'm sure I've seen a few videos on Youtube, it's certainly easier than me explaining it on here.

1 hour ago, Kpowell911 said:

Also. The 3 gauge pod is loose, easy to tighten? 

The trim which houses the boost gauge pod just prises up with a trim removal tool. There's just a couple Torx screws holding the pod to the piece of trim.

2 minutes ago, Luke4efc said:

There was no factory phone holder included on these. You have to remember though, the iPhone didn't exist in 2006 lol.

Well now I feel old!!  I remember people having to carry their iPod AND their Motorola RAZR at school...  

15 minutes ago, Luke4efc said:

When you see the price of these you'll probably say something like "actually my current one will be fine" 😂
Gear knob - 1373779
Gater - 1382856

There was no factory phone holder included on these. You have to remember though, the iPhone didn't exist in 2006 lol.
The centre console isn't hard to remove, however a few of the screws are hidden away. I'm sure I've seen a few videos on Youtube, it's certainly easier than me explaining it on here.

The trim which houses the boost gauge pod just prises up with a trim removal tool. There's just a couple Torx screws holding the pod to the piece of trim.

Im told this was an extremely rare Ford Option part? For a Nokia it appears? Certainly looks Focus specific?

 

Thanks for the part numbers, spot on. £160 for both is about what expected so Ill get them ordered

3 minutes ago, Kpowell911 said:

Im told this was an extremely rare Ford Option part? For a Nokia it appears? Certainly looks Focus specific?

 

That's pretty cool tbf!  You're right, it is a Ford option:

GENUINE FORD CAR NOKIA TELEPHONE AUDIO HANDS FREE ADAPTOR CRADLE 5M5T-19A464-CA | eBay

5 minutes ago, Kpowell911 said:

Im told this was an extremely rare Ford Option part? For a Nokia it appears? Certainly looks Focus specific?

 

Wow I had no idea that was a thing, they look awful 😂😂. It must be really rare, I've seen thousands of posts on various owners clubs about these ST's whilst I've owned mine and never come across these before.

Yea this ST is very well specced to be fair. Has all the Sat Nav, digital climate etc

Just need to know how to remove it? Any ideas?

guessing this is similar for the ST?

Before i order a gearknob, can you get an insert like you can for the pre facelift?

 

https://www.ebay.co.uk/itm/Genuine-Ford-Focus-MK2-Facelift-ST-RS-Gear-Knob-Insert-Cover-Cap-6-Gear-/164269166006?_trksid=p2349624.m46890.l49292

No you can't mate

Not sure what colour your car is but someone is selling a gearknob here : https://www.focusstoc.com/forums/classifieds/item/60201-pfl-gear-knob/

If you have an ST its well worth joining. 

I go between here and there and between both forums get the best advice going 🙂

All done. Now to blank the holes. Any ideas? Maybe an insert or something? 

I'd buy some rubber matting to fill the whole base area, either model specific, or to cut to shape.

https://www.ebay.co.uk/itm/383961232436
 

?

20 minutes ago, Kpowell911 said:

https://www.ebay.co.uk/itm/383961232436
 

?

Yeah, that's what I was thinking.

On 3/7/2021 at 1:23 PM, TomsFocus said:

Well now I feel old!!  I remember people having to carry their iPod AND their Motorola RAZR at school...  

You feel old?? I remember how excited we all were when a school friend's rich parents bought him a Sinclair Cambridge Radionics calculator!