Hello Guys.

 

Ive just fitted a Truck man hard top to the back of my new (2021) Ford Ranger Wildtrack. I ve wired it all in ok I thought. The heated screen works, the interior light works and the brake light works but I cannot get the central locking to work even tho I connected it up to the right colour wires on the trucks loom. 

 

Any I deas why the central locking wont lock the Truckman top. 

 

Regards Ben

 

 

I would recheck the wires you connected too. Sometimes there can be the same colour wires for different functions

Would the hatch on the Truck Man top not be equal to a boot/tailgate ? if so does it need to be activated with ForScan. I don't the answer but it was just a thought

had the same problem and spent the day at truckman, they said it was wired in the wrong way round, but I think Fords had changed the wiring loom, try wiring the wrong way 

2 hours ago, Pickerup said:

had the same problem and spent the day at truckman,

Hello new member "M" I don't think your post will be read by Ben. He's what I call a 'OPW' (One Post Wonder) he joined 27 March 2021, asked for help and has never been back to the forum again. So I guess his problem has gone away or he's not bothered anymore.

Anyhow "M" welcome to the Ford Owners Club. 👍

I have a 21 ford ranger , it came with canopy already fitted but not wired in , it’s a ridge back vert-x canopy. It can see a wiring loom pushed between the back of the pick up and the canopy. Unfortunately can’t get a picture of it. Does anyone know if this canopy can be plugged direct to the truck or does it need to be split to the different parts . Brake light/ central locking / heated rear screen / interior light.