Jump to content
Do Not Sell My Personal Information


2013 2.2 Ranger no boost


Recommended Posts

Hi guys, need some help.

I have a 2013 2.2 Ford Ranger XL, I just recently got the engine replaced along with the turbo, radiator, water pump, timing kit and mass air intake filter. after driving it for the first time since the repairs I found that the truck lacks any  power and struggles to get upto speed regardless of it being flat or a hill, although it losses alot of power on inclines. I had removed the intake pipe for the turbo and can confirm that it is pulling air into the turbo, I had also noticed a small amount fo blue/grey smoke when I accelerate. I have had diagnostics ran on it and found that the turbo, egr, dpf and cat are all working without issue, there is also no warning lights on the dash and 0 faults on the ECU. at this point I am stumped as to what could be wrong, any help.qould be greatly appreciated.

thanks.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Forums


News


Membership