Jump to content
Do Not Sell My Personal Information

Idle Air Control Valve


frannerc73
 Share

Recommended Posts


how do you change the idle air control valve in a 2000 w reg focus?????

hello and welcome,

what size of engine is it?

Link to comment
Share on other sites

1799

you can do it from above or below i found above easier to make room remove the airbox easiest way without touching the maf is to loosen the clamp on the airbox side remove the 4 top screws so the upper part of the airbox comes off and put to the side now just pull up on the bottom part and the airbox is out now you can get into the icv disconnect the wiring plug and simply undo the two bolts holding it in place i think they are 15mm cant remember fitting is just the reverse simple job to do

Link to comment
Share on other sites

you can do it from above or below i found above easier to make room remove the airbox easiest way without touching the maf is to loosen the clamp on the airbox side remove the 4 top screws so the upper part of the airbox comes off and put to the side now just pull up on the bottom part and the airbox is out now you can get into the icv disconnect the wiring plug and simply undo the two bolts holding it in place i think they are 15mm cant remember fitting is just the reverse simple job to do

if its similar to the 1.6 engine the bolts are 8mm hex heads i think

Link to comment
Share on other sites


Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership