Jump to content
Do Not Sell My Personal Information

Ford Focus Ghia - Automatic 2008 : ACCLLERATION REDUCED/TRANSMISSION MALFUNCTION on the dashboard. Diagnostic Reports attached


FordOwner11
 Share

Recommended Posts

Hi there,

On the dashboard the following error messages are poping up. I have attached 2 Diagnostic Reports and also Errors on the dashboard. The second report is after cleared all the error codes. 

I would be very greatful if any experts here let me know what is the problem might me how much its going to cost to repair?

Please find the attached files.

Many thanks in advance.

Dash_board_error1.jpg

Dash_board_error2.jpg

Fist_Report.jpg

Second_Report.jpg

Link to comment
Share on other sites


It appears you have a lot of ‘U’  can bus communication error codes, 2006-2011 focuses sometimes suffer from dry solder joints in the instrument cluster affecting tha can busses . A slap on the dash just above the IC can temporarily make the circuits contact and can be an indication that may be the issue.  Resoldering the ic pcb. Is the simplest route if this is the case and many companies do this  usually about £100

worth checking

 

  • Like 1
Link to comment
Share on other sites

Thanks a lot RL123. I really appreciate it 🙏

Link to comment
Share on other sites

Hi, As RL123 says, it's the cluster solders.

Search on eBay for "Focus MK2 Instrument cluster repair" and send your cluster off.

Clear fault codes when you refit repaired cluster.

  • Like 1
Link to comment
Share on other sites

On 1/11/2022 at 1:45 PM, DaveT70 said:

Hi, As RL123 says, it's the cluster solders.

Search on Ebay for "Focus MK2 Instrument cluster repair" and send your cluster off.

Clear fault codes when you refit repaired cluster.

Hi Dave,  Sorry, I am just reading your message. Thanks a lot for responding to my advert. Please see my Local Ford service Center Report and cost to replace it. As its expensive and its not worth spending that much money I said no to them. I am looking for a local garage who can do this for less. I will look on eBay now. Thanks a lot again.image.thumb.png.b3857f1ea336d5c60b798e0eafd9e1be.png

Link to comment
Share on other sites


I had a look on eBay its very reasonable price to repair.  Thanks a  lot.

However there are none near Slough. Not sure how I can send my unit to them 😞

Link to comment
Share on other sites

2 hours ago, FordOwner11 said:

I had a look on ebay its very reasonable price to repair.  Thanks a  lot.

However there are none near Slough. Not sure how I can send my unit to them 😞

I can post it. Thanks Dave.

Link to comment
Share on other sites

11 hours ago, FordOwner11 said:

I can post it. Thanks Dave.

Yes, post it off buddy. My Brother-in-law got his back in 2 days.

Remember to clear DTCs when you refit repaired cluster

Just so you know, car will not work without cluster in

Link to comment
Share on other sites

2 hours ago, DaveT70 said:

Yes, post it off buddy. My Brother-in-law got his back in 2 days.

Remember to clear DTCs when you refit repaired cluster

Just so you know, car will not work without cluster in

Good morning Dave, Really appreciate your help. May I know where did your brother-in-law send it to please? I see many on eBay not sure which company is best.

Many thanks in advance.

 

Link to comment
Share on other sites

Just choose the best price, the Essex company is charging £95 but there's others charging £54 or £69

Link to comment
Share on other sites

1 hour ago, DaveT70 said:

Just choose the best price, the Essex company is charging £95 but there's others charging £54 or £69

Thanks a lot Dave.

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership