Jump to content
Do Not Sell My Personal Information


Ford focus mk2.5 Zetec s front splitter


Dai59
 Share

Recommended Posts

Hi guys I was wondering have anyone fitted a zetec s front splitter and if so what the easiest way of doing it I did see on the splitter it has 3 holes on it and my bumper has 3 holes so I was going to use nut and bolts and use bond?thank you 

Link to comment
Share on other sites

Well it depends what splitter you have.

Mine is different altogether because its for an ST rather than zetec-s. I fitted 5 bolts instead of 3. It didn't have anything securing the sides though.

It also depends on the quality of your splitter. Some cheaper ones require a bit of fettling to get them to fit properly.

You'll have yo just fit it and see how it looks.

Link to comment
Share on other sites

Hi luke thanks for the feedback I no what you meen just see how it go lol and it a  second hand genuine zetec s front splitter my next thing is st side skirts which I am in the middle of preparing for painting thanks again 

Link to comment
Share on other sites


Hi guys any one who is  fitting a front zetec s front splitter all you need is 3m double side tape and 2 push in clips and one that screws in with a plastic bolt plus panel wipes I found some pictures cheers 

Screenshot_20220115-165419_eBay.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Forums


News


Membership