Air intake help

[PureStrength]

Afternoon all

any suggestions on what pipe to attach not being OEM? I can’t afford one at the moment as for some reason there really expensive!

it’s for the air Inlet pictured (pink square) it’s a fiesta mk6, I have tried 2 pipes so far but there is nowhere to run them too??? Both of old cars 50mm diameter. They fit nice in the box but nowhere to suffice air inlet.

thanks in advance 

[unofix]

You need the 90 degree bend and the pipe. It comes as one complete unit [Part 1306950] including the front air intake which you already have.

Ford parts catalogue: https://ford.7zap.com/en/car/54/code.8d,1.41860,2.44091,6.33743,7.29708,10.32097/9/1545/15289/66424/#9A673

eBay: https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=1306950&_sacat=0

I would try vehicle scrapyards they are a very common item used by thousands of Fiesta's

[PureStrength]

1 hour ago, unofix said:

You need the 90 degree bend and the pipe. It comes as one complete unit [Part 1306950] including the front air intake which you already have.

Ford parts catalogue: https://ford.7zap.com/en/car/54/code.8d,1.41860,2.44091,6.33743,7.29708,10.32097/9/1545/15289/66424/#9A673

eBay: https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=1306950&_sacat=0

I would try vehicle scrapyards they are a very common item used by thousands of Fiesta's

Thanks @unofix that’s the one I mentioned is stupidly expensive even from brokers! Dunno what to do, I’ve attached a Inlet hose for the moment but now it’s stuttering??

confused, I mite have to re route the pipe and see how that goes.

[unofix]

To be honest, I'd just leave it off. The only time it would make any difference is in extremely hot weather and that only happens one day a year in the UK

[OvEr_KiLL]

pipercross do induction kits where you dont need that hose bit, something like this if you want a bit of noise

https://www.thepipercrossshop.co.uk/products/pipercross-car-induction-kit-pk252?rq=nf_car~mk_ford~md_fiesta-mk-6~xt_1-25-16v~yr_2008

[PureStrength]

14 hours ago, OvEr_KiLL said:

pipercross do induction kits where you dont need that hose bit, something like this if you want a bit of noise

https://www.thepipercrossshop.co.uk/products/pipercross-car-induction-kit-pk252?rq=nf_car~mk_ford~md_fiesta-mk-6~xt_1-25-16v~yr_2008

Thanks @OvEr_KiLL, I have reverted it to OEM as the pipe work and cone that we’re on it was disgusting. The cone itself was rusted so god knows how long that was on. I replaced that and then found the breather pipe was split so reverted to factory.

just want to try drag some cold air in but all pipes I’ve tried so far have been doggers! Had 2 refunds from eBay as 2 hoses split within a week. 
 

effort lol

[Paulkp]

Also on Fusions.

On 6/18/2022 at 3:58 PM, unofix said:

I would try vehicle scrapyards they are a very common item used by thousands of Fiesta's

"To be honest, I'd just leave it off. The only time it would make any difference is in extremely hot weather and that only happens one day a year in the UK"

and we have just had that !

[Paulkp]

Josh - If I assume that you had a cone filter......

.....is there a filter in the filter box itself ?

[PureStrength]

1 hour ago, Paulkp said:

Josh - If I assume that you had a cone filter......

.....is there a filter in the filter box itself ?

The OEM box was not on. It had an induction kit on which had been seriously neglected. I have never seen a rusted filter 😵.

I have reverted it to standard (box cost £25 with new filter £12) the pipe needed for inflow is minimum £45. What’s that about!

just looking for alternate options if there are any. I was contemplating running a pipe to the fog light.

I have tried 2 ramair 50mm pipes/ hoses but they both tore within days, so I was refunded. 

I may end up just leaving it although I have noticed the internal temperature has dropped since attaching another hose, it’s just there’s minimal routing space.

cheers