miniman86 Posted December 12, 2010 Share Posted December 12, 2010 hey all, i bought my puma 3 days ago, and i've since realised that i don't get any abs/traction control lights up when i initially turn on the car, checked the fuse and it seems to be ok, so i was wondering if the abs could have been unplugged, and where would i locate this? or is it more likely that someone has just removed the bulb? also the electric fan never kicks in like my last puma did, any ideas where it gets the signal to turn on from?? thanks in advance fot your help, Alex Quote Link to comment Share on other sites More sharing options...
Parkesie Posted December 13, 2010 Share Posted December 13, 2010 Check the bulb 1st even if the abs was disconnected the light would be on constant. Is it the interior fan thats not working? Its common for the resistor pack to die, usualy find that it only works on full power. If its the rad fan it might just not be getting hot enough in this cold weather for it to need to kick in. after that youd need to check fuse temp switch and fan motor. Quote Link to comment Share on other sites More sharing options...
tommy.h Posted December 13, 2010 Share Posted December 13, 2010 Hi Miniman have a look at attached. it does seem that H29 & H99 are both connected through the same fuse. tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.