stevevalo Posted August 8, 2011 Share Posted August 8, 2011 After replacing the front discs and pads, a few days later the battery was completely discharged. After recharging and reconnecting the battery I noticed that a motor was running. I traced this to the ABS pump motor, this was confirmed by removing the 40amp fuse protecting that circuit, Any ideas what has caused the ABS pump to continue running even when the key is not in the ignition, has it anything to do with the replacing the front discs and pads? Quote Link to comment Share on other sites More sharing options...
stevevalo Posted August 30, 2011 Author Share Posted August 30, 2011 I got the fault codes checked at the weekend. The only fault showing is a bad earth on the ABS motor. But the gargage I took it to didn't have the equipment to check for a bad earth. Would this cause the motor to run all the time? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.