Danny87 Posted October 8, 2011 Share Posted October 8, 2011 Hiya mate, wow you've been busy! That's some great work you've done there, really impressed. Those Speakers sound really nice, exactly what I need to upgrade my system. It's really tinny, and I love listening to music in my car so will get my MOT out of the way at the start of next month and then go about upgrading my Speakers. Am happy with the Ford headunit it's just the Speakers aren't too good. If you send me a PM mate, I have got hold of a PDF for the Ford diesel engine from a Haynes manual. Will email it over to you once I have your email address - it's great because you can print it out and then you don't have to worry about getting the book damaged. Cheers, Dan Quote Link to comment Share on other sites More sharing options...
raymondee100 Posted October 9, 2011 Share Posted October 9, 2011 hi every one, need some advise , i have an old work van which i now use for my general transport its a mk6 1.8 diesel 55 , its in fair condition and been a really good work horse , it sailed through its last mot and i begrudge selling it for a car as its handy having a van , ive never modified a vehicle but i'm quite mechanically minded .Here's the question , i want to replace the rear doors with a single hatch type door , does any 1 have any experience on this and is it costly ? ive seen the un sprayed doors on eBay etc but they are bare bones with no hinges or catches , Any help on this i would be really greatful cheers Ray Quote Link to comment Share on other sites More sharing options...
mickmk6 Posted October 9, 2011 Author Share Posted October 9, 2011 hi every one, need some advise , i have an old work van which i now use for my general transport its a mk6 1.8 diesel 55 , its in fair condition and been a really good work horse , it sailed through its last mot and i begrudge selling it for a car as its handy having a van , ive never modified a vehicle but i'm quite mechanically minded .Here's the question , i want to replace the rear doors with a single hatch type door , does any 1 have any experience on this and is it costly ? ive seen the un sprayed doors on ebay etc but they are bare bones with no hinges or catches , Any help on this i would be really greatful cheers Ray hi m8 thats some thing im looking to do..... from what i gather u buy the rear single door ..remove hinges from the side and get estate car boot hinge welded back on to the top inside crossmember then use a estate car rear door mechanism(lock) and catch. or simply got to a auto electrics and get them to install a door lock and popping system then u need to fit the gas shockers (or a broom handle ) i suppose a bonnet stay would do, to keep it up ..fitted i think about 170 maybe 300 depending on if u can weld .. handy if u can drill, weld . bodge to fill in where the old hinges wer and spraypaint ..or got the hole van resprayed .as like mine i bet not all the pannels match anyway as the paint was rubbish on the vans ... Quote Link to comment Share on other sites More sharing options...
mickmk6 Posted October 13, 2011 Author Share Posted October 13, 2011 just a update really...... back lights have went off ..nightmare ... was sat in the dark tonight soldering all the wiring from the loom into the tow bar socket as it only had them stoo pid blue inline wiring clips tying it in grrrrr... only notice when i got pulled by a nice police woman who followed me home ty.... but its working .. just got to sort the eart out now as when the tail lights are on ,,,depress the brake peddle 1 brk lte works the other site complealy goes off .stop and tail.. this fault is the earth ????? it is isn't it Quote Link to comment Share on other sites More sharing options...
mickmk6 Posted October 23, 2011 Author Share Posted October 23, 2011 the fault was due to the stop tail bulb holder had burnt out and took out the earth so more chopping wires out and re soldering then going mental in for parts desk when they wanted £27 for a bit of plastic to hold the bulb.. this must b a common fault on this van as every scrapyard i found with a van in had none of the holders in dammit .. can any one tell me where the reversing light switch is .. as the reversing lights are working intermittently now god dam it ...yes its defo the switch .. help or ill just b wiring a switch in the dash soon .. Quote Link to comment Share on other sites More sharing options...
mickmk6 Posted November 8, 2011 Author Share Posted November 8, 2011 got the wheels on with 10mm spacers on the back as the tires wer rubbing at first due to incorrect tire sizes alloys are 195/r15 tires are 200-55 r 15.. Quote Link to comment Share on other sites More sharing options...
Mrmac1966 Posted April 27, 2021 Share Posted April 27, 2021 I have just rescued a 1.8 diesel 51 plate van from the scrappers after the obligatory welding i want to convert it to a 2.0 blacktop will the diesel tank be ok if cleaned as its brand new be a shame to change it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.