Markyboy1983 Posted December 5, 2011 Share Posted December 5, 2011 Good evening, I was hoping someone could give me a bit of advice on changing a fuel feed pipe on a 2.0 TDCI Focus 2005. Is there much else I need do other than watch for any fuel dripping out of either end when I remove the pipe? It looks relatively easy but I thought i'd check with some people who know more about motors than me. Thanks, Mark Quote Link to comment Share on other sites More sharing options...
stef123 Posted December 6, 2011 Share Posted December 6, 2011 I would say your about right mate, have a few rags handy and cover any electrical parts and the alternator if need be. Restarting might be a nightmare as you will have a lot of air in the system. Quote Link to comment Share on other sites More sharing options...
Markyboy1983 Posted December 6, 2011 Author Share Posted December 6, 2011 I would say your about right mate, have a few rags handy and cover any electrical parts and the alternator if need be. Restarting might be a nightmare as you will have a lot of air in the system. Thanks for the reply. I have changed it but I have a feeling I will need to get some jump leads to start it. Will it just take a long time to start and is it just a case of being patient? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.