F0rd P0wer Posted January 29, 2012 Share Posted January 29, 2012 Hi guys I've got a problem with the passenger side window on my 3door 2006 fiesta zetec.... The window went down and wouldn't come back up,So i took the door card off and tested the two wires on the back of the motor and only one of them had power the other one was dead with not even an earth signal. so i run a earth wire to it and the window went up. The strange part is that from testing all the wires it seems like the switch on the passenger side only makes the passenger window go down, and the switch on the drivers side (to control the passenger window) only makes the passenger window go up if i give the other wire on the back of the motor an earth. I'm usually quite good with eclectics but this one has me confused.....lol Any ideas? P.s.... The drivers window works perfectly Quote Link to comment Share on other sites More sharing options...
Stoney871 Posted January 29, 2012 Share Posted January 29, 2012 Knackered passengers side window switch? Dodgy earth from passenger door is evident too. Quote Link to comment Share on other sites More sharing options...
F0rd P0wer Posted January 29, 2012 Author Share Posted January 29, 2012 Knackered passengers side window switch? Dodgy earth from passenger door is evident too. Thanks for the reply ;) The window doesn't even go up or down using the drivers switch. I did find one earth on the the back of the passenger switch (skinny black wire) and i used the metal part of the door for my test light o that should be ok. Any other ideas? Quote Link to comment Share on other sites More sharing options...
F0rd P0wer Posted February 1, 2012 Author Share Posted February 1, 2012 Anyone else ? Quote Link to comment Share on other sites More sharing options...
btmaldon Posted February 1, 2012 Share Posted February 1, 2012 Could it be a relay? Not sure if the windows have one or not. Quote Link to comment Share on other sites More sharing options...
orcomma Posted February 2, 2012 Share Posted February 2, 2012 the switch reverses the motor polarity (which of the two wires is earth and which is live) if one wire is "dead" i.e. not live or earth, it suggests the switch is not doing its job properly. see if putting the switch into "down" position then seeing if your working live wire becomes a working earth. i suspect the switch is faulty. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.