1litre ecobeast Posted May 12, 2015 Share Posted May 12, 2015 Does the same apply for a mk3? 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted May 12, 2015 Author Share Posted May 12, 2015 Does the same apply for a mk3?Principles are the same zetecS kit attaches to standard bumpers, But ST/RS are full replacement panels. Quote Link to comment Share on other sites More sharing options...
1litre ecobeast Posted May 12, 2015 Share Posted May 12, 2015 I'm sorry to be a pain but does just clip over existing bumper? 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted May 12, 2015 Author Share Posted May 12, 2015 I'm sorry to be a pain but does just clip over existing bumper?Im unsure of the exact bonding method on the Mk3 it may also require for example "Tiger Seal" body kit adhesive, and or the removal of an existing scuff panel.Fitting instructions would be provided in the box from Ford and the only main parts involved would be; an existing standard bumper and the zetecS diffuser, Quote Link to comment Share on other sites More sharing options...
1litre ecobeast Posted May 12, 2015 Share Posted May 12, 2015 Cheers pal I've found a second hand one so I doubt instructions come with it. 1 Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 Well its not a ford zetecS rear diffuser that has a lip on the sides, Its just a copy of the centre diffuser section, But to the untrained eye, they look much the same when fitted, Id try buying from china directly though mate; they are selling for under 30pounds http://www.aliexpress.com/item/REAR-BUMPER-LIP-SPOILER-BODY-KIT-for-FORD-FOCUS/727580424.html Lenny do you remember who this seller was as I have looked on aliexpress and not found any matching products :( EDIT: Found this fantastic one but the shipping is a killer. http://www.aliexpress.com/item/REAR-BUMPER-LIP-SPOILER-BODY-KIT-for-FORD-for-FOCUS-mk2-5dr-hatchback-2009-2010-2011/32239002227.html Any ideas where I can pick one up now for less than £100? 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 22, 2015 Author Share Posted July 22, 2015 Lenny do you remember who this seller was as I have looked on aliexpress and not found any matching products :( EDIT: Found this fantastic one but the shipping is a killer. http://www.aliexpress.com/item/REAR-BUMPER-LIP-SPOILER-BODY-KIT-for-FORD-for-FOCUS-mk2-5dr-hatchback-2009-2010-2011/32239002227.html Any ideas where I can pick one up now for less than £100? must be Mr. Cha-Ching now since he aint selling anymore lol Try Lightinthebox.com Or Find an english site that allows you to use TaoBao.com Both china auction sites Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 must be Mr. Cha-Ching now since he aint selling anymore lol Try Lightinthebox.com Or Find an english site that allows you to use TaoBao.com Both china auction sites Lenny, On this skirt shouldn't the exhaust go through the two middle square bits not on the edge? Debating if it will look silly or not? 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 22, 2015 Author Share Posted July 22, 2015 Lenny, On this skirt shouldn't the exhaust go through the two middle square bits not on the edge? Debating if it will look silly or not? Its a nice idea mate but would melt the bumper.Exhaust can get up to around 900 degrees more if its stainless steel holds more heat. 1 Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 Its a nice idea mate but would melt the bumper. Exhaust can get up to around 900 degrees more if its stainless steel holds more heat. Cleared that up. Can't find it on either sites you listed. Regards to duplex exhaust if I just want two pipes out the end what should I ask for? Do I need a specialist company to do it? There are a lot of exhaust places around here but I think they fit them more than create ect 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 22, 2015 Author Share Posted July 22, 2015 On 7/22/2015 at 2:46 PM, Jeremyc said: Cleared that up. Can't find it on either sites you listed. Regards to duplex exhaust if I just want two pipes out the end what should I ask for? Do I need a specialist company to do it? There are a lot of exhaust places around here but I think they fit them more than create ect Any exhaust repair place with a mandrel bending machine can build you a duplex, Heres an image to show them mate, A duplex pipe will fit from existing muffler, designed to hang from focus ST exhaust hangers, The holes for these hangers are already pre-drilled in the chassis, Simple bolt on job, The duplex can be designed to sleeve over the pipe exiting your existing muffler, 1 Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 Any exhaust repair place with a mandrel bending machine can build you a duplex, Heres an image to show them mate, A duplex pipe will fit from existing muffler, designed to hang from focus ST exhaust hangers, The holes for these hangers are already pre-drilled in the chassis, Simple bolt on job, The duplex can be designed to sleeve over the pipe exiting your existing muffler, Fantastic post will refer them to this post when I get a rear skirt for the car. Anyone on the forums wana sell 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 22, 2015 Author Share Posted July 22, 2015 Fantastic post will refer them to this post when I get a rear skirt for the car. Anyone on the forums wana sell i'll be selling my Genuine ZetecS rear diffuser and bumper around November, Be around 130 pounds excluding shipping via DPD. Im going for ST replica Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 i'll be selling my Genuine ZetecS rear diffuser and bumper around November, Be around 130 pounds excluding shipping via DPD. Im going for ST replica Aren't they essentially the same? I thought the zetec diffuser looks nicer, hopefully I'd have one by november 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 22, 2015 Author Share Posted July 22, 2015 On 7/22/2015 at 3:57 PM, Jeremyc said: Aren't they essentially the same? I thought the zetec diffuser looks nicer, hopefully I'd have one by november No the ST bumper is more pronounced; its fatter and one piece construction, My zetecS diffuser was bonded with tape, Its starting to seperate from the bumper due to cleaning agents hardening the foam tape it was stuck with. It needs tiger seal to bond correctly, should have been bonded with tiger seal in the first place. Im not botherd though goin for ST its more subtle aswell ya see im gettin old now in my thirty's 2 Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 What you reckon? http://www.triplercomposites.com/product/ford-focus-st-facelift-diffuser-fins/ Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 22, 2015 Author Share Posted July 22, 2015 What you reckon? About what please dont be naked... 1 Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 About what please dont be naked... Haha sorry forgot to include the link! http://www.triplercomposites.com/product/ford-focus-st-facelift-diffuser-fins/ 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted July 22, 2015 Author Share Posted July 22, 2015 Haha sorry forgot to include the link! http://www.triplercomposites.com/product/ford-focus-st-facelift-diffuser-fins/Look great 1 Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted July 22, 2015 Share Posted July 22, 2015 Look great I have purchased it £70.50 in total which is a bit expensive but it is a good EU company. Hopefully it arrives soon and fits well on my mk2.5. Just read it says for focus ST, that is the same same as the mk2.5 facelift right? Quote Link to comment Share on other sites More sharing options...
Jeremyc Posted August 7, 2015 Share Posted August 7, 2015 Alright it came today and now I feel like a right mug! It turned out to only be the diffuse FINS. £62 for 3 diffuser fins and 3 weeks damn. It's not even gloss black its sea grey(It's much greyer in person picture makes it look a bit black)! Well that's £62 down the drain as it doesn't even fit my standard diffuser Quote Link to comment Share on other sites More sharing options...
ZetecGeorge Posted October 21, 2016 Share Posted October 21, 2016 I'm new to all this, but I love the look of the diffuser you have on the titanium. im just wondering how easy it is to achieve this on a standard zetec. How does this fit on a standard zetec bumper? TIA 1 Quote Link to comment Share on other sites More sharing options...
HUS541N Posted January 12, 2017 Share Posted January 12, 2017 looking for zetec diffuser, anyone tried them china makes lol. tryna get a bargain. also would i have to change my titanium bumper? thanks guys 1 Quote Link to comment Share on other sites More sharing options...
Lenny Posted January 13, 2017 Author Share Posted January 13, 2017 On 1/12/2017 at 7:33 PM, HUS541N said: looking for zetec diffuser, anyone tried them china makes lol. tryna get a bargain. also would i have to change my titanium bumper? thanks guys The ZetecS kit attaches to the standard focus bumper any focus hatchback both 3 & 5 Door from 2008-2011 excluding the ST & RS models, The China diffuser section is a non Genuine immitation item, it doesn't sit as low as the original article nor does it add a lip to the bumper it just sticks on the middle of the existing bumper, But if your happy with its results it's definitely a cheaper alternative. This is the Genuine Ford Focus ZetecS rear diffuser; notice the lip which spans the full width of the rear bumper This is the imitation rear diffuser from China doesn't add the lip to the bumper just creates a centre section. Quote Link to comment Share on other sites More sharing options...
salsheikh Posted January 13, 2017 Share Posted January 13, 2017 14 hours ago, HUS541N said: looking for zetec diffuser, anyone tried them china makes lol. tryna get a bargain. also would i have to change my titanium bumper? thanks guys Hussain i have an oem one that has a little damage (nothing major, a few scuffs and one crack) that is available cheap and looks like what Lenny has on his car. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.