Jump to content
Do Not Sell My Personal Information

Urgent Need Help!


AndrewC17
 Share

Recommended Posts

hi i was wondering if u can help me my 51 1.3 ford fiesta flight started to over rev when started and continue at a constant speed when my foot was off the accelatrator. We got a diagnostic and found the error code p1504. So we checked the air filter and was fine aswell as renewing the idle air control valve. But the car is still idleing very high. Can u help me.

Link to comment
Share on other sites


p1504 is iac circuit which is most likely going to be you iac (idle air control valve) they get dirty and stop working you can try cleaning it but its prob worth just replacing.

Link to comment
Share on other sites

yeh have replaced it but still reving high got any other things u think i should do

Link to comment
Share on other sites

could be the MAF sensor? have you also checked and changed the Air filter as necessary?

Link to comment
Share on other sites

I don't know whether this helps but we had a 2000 Ka with the same engine which required some "reworking" of wiring to the throttle position sensor and was a known fault at the time. Do the revs drop when the car is stationary? Ours only used to rev high when on the move, like when changing gear, but would drop to a proper idle when you came to a complete halt.

Link to comment
Share on other sites


have checked air filter and is fine and about to buy a new one and it revs high for a while when sationary and sometimes drops down to normal idle. Thanks for help guys.

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership